All MIBs › USR-DIALOUT-MIB › usrDialoutWorkstationTimeout
usrDialoutWorkstationTimeout
Module: USR-DIALOUT-MIB
OID (symbolic): USR-DIALOUT-MIB::usrDialoutWorkstationTimeout
OID (numeric): 1.3.6.1.4.1.429.4.25.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Even when it appears there is no activity on a connected virtual port, the client and server are still actively sending and receiving messages. If the client is re-booted, or if the client experiences a system error that interrupts this activity, the server will wait a certain amount of time before terminating the connection. Depending on what caused the interruption, this period of time may allow the client to restore the connection. This time-out value is specified in minutes. The default is 5 minutes. To disable workstation time-out, set this object to 0.
What is usrDialoutWorkstationTimeout?
This value, in minutes, sets how long the server waits before terminating a virtual port connection when the client appears to have stopped communicating, such as after a client reboot. Admins tune it to balance quick recovery of stuck ports against giving clients enough time to reconnect after a transient interruption; a value of 0 disables the timeout entirely. Setting it to 10 gives a rebooting or crashed client 10 minutes to restore the connection before the server tears it down, versus the 5-minute default.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.25.4 snmpwalk -v2c -c public <target> USR-DIALOUT-MIB::usrDialoutWorkstationTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.25.4.1 snmpget -v2c -c public <target> USR-DIALOUT-MIB::usrDialoutWorkstationTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.25.4.1 i <value>
Start monitoring USR/CommWorks/3Com dial access servers (per-port dial-out call-state status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-DIALOUT-MIB::usrDialoutWorkstationTimeout OID value, configure state conditions and alerts, and monitor any USR/CommWorks/3Com dial access servers (per-port dial-out call-state status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.25 | usrDialout | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.25.4 | usrDialoutWorkstationTimeout | USR-DIALOUT-MIB |