UPS2-MIB :: upsStatusOperational

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › UPS2-MIB › upsStatusOperational

upsStatusOperational

Module: UPS2-MIB

OID (symbolic): UPS2-MIB::upsStatusOperational

OID (numeric): 1.3.6.1.4.1.52.4.1.1.10.6.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object contains 8 bits of information about the current operational status of the UPS. The bits are encoded as follows:

BIT 7: 1=replace battery condition BIT 6: 1=low battery condition BIT 5: 1=overloaded output condition BIT 4: 1=on-battery mode of operation BIT 3: 1=on-line mode of operation BIT 2: 1=Smart Boost mode of operation (where applicable) BIT 1: 1=UPS shut down due to low battery, overload, or `sleep' mode BIT 0: 1=run time calibration running

Note that bit 0 is the low-order bit.

What is upsStatusOperational?

An 8-bit field of operational status flags, including bit 4 for on-battery mode, bit 3 for on-line mode, bit 6 for low battery, and bit 7 for replace-battery condition; an admin decodes this bitmask for a full operational snapshot rather than checking each condition separately.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.10.6.1.1.1
snmpwalk -v2c -c public <target> UPS2-MIB::upsStatusOperational

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.10.6.1.1.1.1
snmpget -v2c -c public <target> UPS2-MIB::upsStatusOperational.1

Start monitoring Cabletron Systems UPS product line, SmartUPS/MatrixUPS models (battery/input-output power/environmental status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UPS2-MIB::upsStatusOperational OID value, configure state conditions and alerts, and monitor any Cabletron Systems UPS product line, SmartUPS/MatrixUPS models (battery/input-output power/environmental status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.1ctPhysicalCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.10ctUPSCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.1.10.6upsStatusUPS2-MIB
1.3.6.1.4.1.52.4.1.1.10.6.1upsStatusTableUPS2-MIB
1.3.6.1.4.1.52.4.1.1.10.6.1.1upsStatusEntryUPS2-MIB
1.3.6.1.4.1.52.4.1.1.10.6.1.1.1upsStatusOperationalUPS2-MIB