All MIBs › UPS2-MIB › upsStatusFault
upsStatusFault
Module: UPS2-MIB
OID (symbolic): UPS2-MIB::upsStatusFault
OID (numeric): 1.3.6.1.4.1.52.4.1.1.10.6.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object contains 8 bits of information about the current fault conditions of the UPS. The bits are encoded as follows:
BIT 7: 1=UPS fault - internal temperature has exceeded nominal limits BIT 6: 1=UPS fault - bypass relay (where applicable) malfunction BIT 5: 1=UPS fault - battery charger failure BIT 4: 1=UPS in shut down mode via `S' command BIT 3: 1=UPS in `sleep' mode via `@ddd' command BIT 2: 1=UPS fault - main relay malfunction BIT 1: 1=UPS unable to transfer to on-battery operation due to overload BIT 0: 1=UPS's output unpowered due to low battery shut down
Note that bit 0 is the low-order bit.
What is upsStatusFault?
An 8-bit field of fault flags, including bit 7 for over-temperature, bit 5 for battery charger failure, and bit 2 for main relay malfunction; an admin decodes this bitmask first when the UPS reports any fault condition, to see exactly which internal component failed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.10.6.1.1.2 snmpwalk -v2c -c public <target> UPS2-MIB::upsStatusFault
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.10.6.1.1.2.1 snmpget -v2c -c public <target> UPS2-MIB::upsStatusFault.1
Start monitoring Cabletron Systems UPS product line, SmartUPS/MatrixUPS models (battery/input-output power/environmental status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UPS2-MIB::upsStatusFault OID value, configure state conditions and alerts, and monitor any Cabletron Systems UPS product line, SmartUPS/MatrixUPS models (battery/input-output power/environmental status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.10 | ctUPS | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.10.6 | upsStatus | UPS2-MIB |
| 1.3.6.1.4.1.52.4.1.1.10.6.1 | upsStatusTable | UPS2-MIB |
| 1.3.6.1.4.1.52.4.1.1.10.6.1.1 | upsStatusEntry | UPS2-MIB |
| 1.3.6.1.4.1.52.4.1.1.10.6.1.1.2 | upsStatusFault | UPS2-MIB |