All MIBs › UPS2-MIB › upsAddlFuncsStatusOperational
upsAddlFuncsStatusOperational
Module: UPS2-MIB
OID (symbolic): UPS2-MIB::upsAddlFuncsStatusOperational
OID (numeric): 1.3.6.1.4.1.52.4.1.1.10.9.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object contains 8 bits of information about the current operational status of the UPS. The bits are encoded as follows:
BIT 7: 1=UPS ready to power load upon return of normal line or upon user command BIT 6: 1=UPS ready to power load upon user command BIT 5: 1=UPS in bypass mode as a result of manual bypass control BIT 4: 1=UPS is returning from bypass mode BIT 3: 1=UPS in bypass mode as a result of UPS-Link or key command BIT 2: 1=UPS going to bypass mode as a result of UPS-Link or key command BIT 1: 1=not defined BIT 0: 1=wakeup mode - startup test lasting < 2 sec
Note that bit 0 is the low-order bit.
What is upsAddlFuncsStatusOperational?
An 8-bit field of additional operational status flags found on higher-end UPS models, including bypass-mode bits and a wakeup/startup-test bit, which an admin decodes for bypass-related state not covered by the base upsStatusOperational object.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.10.9.1.1.5 snmpwalk -v2c -c public <target> UPS2-MIB::upsAddlFuncsStatusOperational
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.10.9.1.1.5.1 snmpget -v2c -c public <target> UPS2-MIB::upsAddlFuncsStatusOperational.1
Start monitoring Cabletron Systems UPS product line, SmartUPS/MatrixUPS models (battery/input-output power/environmental status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UPS2-MIB::upsAddlFuncsStatusOperational OID value, configure state conditions and alerts, and monitor any Cabletron Systems UPS product line, SmartUPS/MatrixUPS models (battery/input-output power/environmental status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.10 | ctUPS | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.10.9 | upsAddlFuncs | UPS2-MIB |
| 1.3.6.1.4.1.52.4.1.1.10.9.1 | upsAddlFuncsTable | UPS2-MIB |
| 1.3.6.1.4.1.52.4.1.1.10.9.1.1 | upsAddlFuncsEntry | UPS2-MIB |
| 1.3.6.1.4.1.52.4.1.1.10.9.1.1.5 | upsAddlFuncsStatusOperational | UPS2-MIB |