All MIBs › UPS-MIB › upsConfigOutputVA
upsConfigOutputVA
Module: UPS-MIB
OID (symbolic): UPS-MIB::upsConfigOutputVA
OID (numeric): 1.3.6.1.2.1.33.1.9.5
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-only
Description: The magnitude of the nominal Volt-Amp rating.
What is upsConfigOutputVA?
This object reports the UPS's nominal output rating in Volt-Amps, a manufacturer-set capacity figure rather than a live measurement. Admins reference it when planning how much equipment they can safely connect to the UPS, comparing it against actual measured load to check they aren't approaching capacity. A value of 1500 would indicate this UPS model is rated for a 1500 VA maximum output.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.33.1.9.5 snmpwalk -v2c -c public <target> UPS-MIB::upsConfigOutputVA
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.33.1.9.5.1 snmpget -v2c -c public <target> UPS-MIB::upsConfigOutputVA.1
Start monitoring vendor-neutral, standards-based MIB, Uninterruptible Power Supply (UPS) systems (battery health/runtime/alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UPS-MIB::upsConfigOutputVA OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, Uninterruptible Power Supply (UPS) systems (battery health/runtime/alarm status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.33 | upsMIB | UPS-MIB |
| 1.3.6.1.2.1.33.1 | upsObjects | UPS-MIB |
| 1.3.6.1.2.1.33.1.9 | upsConfig | UPS-MIB |
| 1.3.6.1.2.1.33.1.9.5 | upsConfigOutputVA | UPS-MIB |