All MIBs › UPS-MIB › upsConfigLowVoltageTransferPoint
upsConfigLowVoltageTransferPoint
Module: UPS-MIB
OID (symbolic): UPS-MIB::upsConfigLowVoltageTransferPoint
OID (numeric): 1.3.6.1.2.1.33.1.9.9
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-write
Description: The minimum input line voltage allowed before the UPS system transfers to battery backup.
What is upsConfigLowVoltageTransferPoint?
This object sets the minimum input line voltage the UPS will tolerate before it transfers the load to battery backup. Admins tune this threshold to match the sensitivity of connected equipment and local utility voltage quality, transferring to battery sooner if incoming power sags below acceptable levels. Setting this to 100 RMS Volts would cause the UPS to switch to battery any time input voltage drops below 100V, even if utility power hasn't fully failed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.33.1.9.9 snmpwalk -v2c -c public <target> UPS-MIB::upsConfigLowVoltageTransferPoint
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.33.1.9.9.1 snmpget -v2c -c public <target> UPS-MIB::upsConfigLowVoltageTransferPoint.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.33.1.9.9.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, Uninterruptible Power Supply (UPS) systems (battery health/runtime/alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UPS-MIB::upsConfigLowVoltageTransferPoint OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, Uninterruptible Power Supply (UPS) systems (battery health/runtime/alarm status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.33 | upsMIB | UPS-MIB |
| 1.3.6.1.2.1.33.1 | upsObjects | UPS-MIB |
| 1.3.6.1.2.1.33.1.9 | upsConfig | UPS-MIB |
| 1.3.6.1.2.1.33.1.9.9 | upsConfigLowVoltageTransferPoint | UPS-MIB |