All MIBs › UPS-MIB › upsConfigInputFreq
upsConfigInputFreq
Module: UPS-MIB
OID (symbolic): UPS-MIB::upsConfigInputFreq
OID (numeric): 1.3.6.1.2.1.33.1.9.2
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-write
Description:
The nominal input frequency. On those systems which support read-write access to this object, if there is an attempt to set this variable to a value that is not supported, the request must be rejected and the agent shall respond with an appropriate error message, i.e., badValue for SNMPv1, or inconsistentValue for SNMPv2.
What is upsConfigInputFreq?
This OID holds a number representing the expected power frequency (50 Hz or 60 Hz depending on region) that the UPS should expect from the wall outlet. It tells you what frequency the battery backup is configured to accept. A data center operator sets this when installing a UPS to match their regional power grid frequency.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.33.1.9.2 snmpwalk -v2c -c public <target> UPS-MIB::upsConfigInputFreq
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.33.1.9.2.1 snmpget -v2c -c public <target> UPS-MIB::upsConfigInputFreq.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.33.1.9.2.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.33 | upsMIB | UPS-MIB |
| 1.3.6.1.2.1.33.1 | upsObjects | UPS-MIB |
| 1.3.6.1.2.1.33.1.9 | upsConfig | UPS-MIB |
| 1.3.6.1.2.1.33.1.9.2 | upsConfigInputFreq | UPS-MIB |