Description: This object encapsulates the data corresponding to the umc1ResponseTransNbr 
 and umc1ResponseSeqNbr. The first byte of this umc1ResponseData is a version 
 byte. The second byte is a number of records encapsulated in the 
 umc1ResponseData. A length field precedes all records (Variable as well as 
 fixed length records). The length field specifies the length of record in 
 Octets. 

General Response Data Format is shown below:
-------------------------------------------

Version     Number Of     Length of     Record 1    Length of     Record 2 ...
(Byte)      Records       Record 1                  Record 2 
            (Byte)        (Byte)                    (Byte)

The record format depends on the type of data that is being dumped.

Record Data Format.
------------------
    
For the _ReadTable_ command.
---------------------------

1. Record format for Terminal Info Table (umc1TerminalInfoTable)

    Fields        Terminal    Terminal   Serial       Baud    New  
                  Id          Name       Device       Rate    Terminal
                                         Type                 Id
    Num Bytes     1           1-21       1            1       1

2. Record Format for Terminal Status Table (umcTerminalStatusTable)

    Fields        Terminal    Terminal   
                  Id          Status      
    Num Bytes     1           1        

3. Record Format for Inventory Shelf Table (umcInventoryShelfTable)

    Fields        Terminal    Shelf   Shelf 
                  Id          Id      Type      
    Num Bytes     1           1       2

4. Record Format for Inventory Plug-in Table (umcInventoryPluginTable)

    Fields        Terminal    Shelf   Slot    Plugin 
                  Id          Id      Id      Type
    Num Bytes     1           1       1       2

5. Record Format for Topology Link Table and ACO Snap Topology Link Table 
    (umc1TopologyLinkTable and umc1AcoSnapTopologyLinkTable)

    Fields        TerminalA   TerminaB
                  Id          Id 
    Num Bytes     1           1

6. Record Format for cross connect Table( umc1XCTable)

    Fields        XC Index    XC Data
    Num Bytes     1-255       0-255

7. Record Format for GR-303 Group Provisioning Table 
    (umc1GR303Table)

    Fields      GR-303  GR-303
                Index   Data
    Num Bytes   1-255   0-255

8. Record Format for TR-08 Group Provisioning Table 
    (umc1TR8Table)

    Fields      TR-08   TR-08
                Index   Data
    Num Bytes   1-255   0-255

9. Record Format for ATM Protection Group Provisioning Table 
    (umc1AtmProtGrpTable)

    Fields      ATM         ATM
                Protection  Protection
                Index       Data
    Num Bytes   1-255       0-255

10. Record Format for Port Profile Provisioning Table 
    (umc1PortProfTable)

    Fields      Port        Port
                Profile     Profile
                Index       Data
    Num Bytes   1-255       0-255

11. Record Format for Terminal Span Table (umc1TerminalSpanTable)

    Fields      Near    Near    Near    Near    Far     Far     Far
                End     End     End     End     End     End     End
                Term    Shelf   Slot    Plugin  Term    Shelf   Slot
                Id      Id      Id      type    Id      Id      Id
    Num Bytes   1       1       1       2       1       1       1

12. Record Format for Shelf Span Table (umc1ShelfSpanTable)

    Fields      Near    Near    Near    Near    Far     Far     Far    
                End     End     End     End     End     End     End     
                Term    Shelf   Slot    Plugin  Shelf   Slot    Plugin  
                Id      Id      Id      type    Id      Id      type    
    Num Bytes   1       1       1       2       1       1       2        


For the _GetAllSeqNum_ command.
------------------------------
When the umc1CommandId is _GetAllSeqNum_, refer to the object description of 
umc1SystemAllSeqNbr for the record format.


For the _GetActiveTermName_ command.
-----------------------------------
When the umc1CommandId is _GetActiveTermName_, the record format is:

Fields      Terminal    Terminal    Terminal    Baud    New         Serial
            Id          Status      Name        Rate    Terminal    Device
                                                        Id          Type
Num Bytes   1           1           1-21        1       1           1


For the _GetCpuDbDumpPort_ command.
----------------------------------
When the umc1CommandId is _GetCpuDbDumpPort_, the record format is:

Fields       Port Number
Num Bytes    4


For the _SetOrDelete_ command.
-----------------------------
When the umc1CommandId is _SetOrDelete_, the record format is:

Fields        No. of Record Created/Deleted
Num Bytes     1


For the _ClearCache_ command.
----------------------------
When the umc1CommandId is _ClearCache_, the record format is:

Fields        Is Cache Cleared
Num Bytes     1
 
Is Cache Cleared value      Meaning
       1                    Cache Successfully cleared 
If error occured while clearing cache, Agent shall issue _gerErr_ to 
Management Station.


For the _ActivateAco_ command.
-----------------------------
When the umc1CommandId is _ActivateAco_, the record format is:

Fields        Result Byte
Num Bytes     1
 
Result Byte value            Meaning
       1                     ACO Activated Successfully 
If error occured while activating ACO, Agent shall issue _gerErr_ to
Management Station.


For the _AotRollover_ command.
-----------------------------
When the umc1CommandId is _AotRollover_, the record format is:

Fields        Result Byte
Num Bytes     1
 
Result Byte value            Meaning
       1                     AoT to End-To-End ATM Rollover was Successful 
If error occured while rolling over Aot, Agent shall issue _gerErr_ to
Management Station.


For the _CurTrafficStats_ command.
---------------------------------
When the umc1CommandId is _CurTrafficStats_, the record format is:

Fields     Terminal  Total   Blocked   Used      Available   Non-Available Current
           Id        Calls   Calls     Channels  Channels    Channels      Hour Load
                                                        
Num Bytes  1         2       2         2         2           2             2

---------------------------------------------------------------------------
For the command ID equal to _GetLineCardStatus_, the response data will 
follow the 'General Response Data Format' as defined above.  The definition 
of the response record will vary depending upon the version of the UMC system.
In all cases, the response data will contain a single record.  

Original Response data format for command ID _GetLineCardStatus_.
The version octet = 1.  The number of records octet = 1.  The length of 
record #1 and the record format are determined by the octet string returned 
by the UMC system CPU card.  In general, the record represents an array of six 
elements where each element contains the following attributes for a single
circuit/port: port status, downstream rate, downstream SNR margin, upstream 
rate, and upstream SNR margin.

Enhanced Response data format for command ID _GetLineCardStatus_.
The version octet = 1.  The number of records octet = 1.  The record will 
contain an array of equivalent data elements.  The size of the array 
will depend on the number of circuits/ports supported by the card.  The length 
of each element and the element format are determined by the octet string 
returned by the UMC system CPU card.  In general, each record contains the 
following attributes for a single circuit/port: port status, downstream rate, 
downstream SNR margin, upstream rate, and upstream SNR margin, downstream signal 
attenuation, downstream current channel bit rate, downstream transmitted signal 
power, downstream relative capacity operation, upstream signal attenuation, 
upstream current channel bit rate, upstream transmitted signal power, and 
upstream relative capacity operation.

---------------------------------------------------------------------------
For the command ID equal to _GetAtmStatistics_, the response data will 
follow the 'General Response Data Format' as defined above.  The version 
octet = 1.  The number of records octet = 2.  The response data will contain 
a two records.  The first record represents the 'receive' ATM 
statistics and the second record represents the 'transmit' 
ATM statistics.  The length of each record and the record format
are determined by the octet string returned by the UMC system CPU card.

---------------------------------------------------------------------------
For the command ID equal to _GetAdslPmAttribute_, the response data will 
follow the 'General Response Data Format' as defined above.  The response
data will contain a single record or multiple equivalent records depending
on the 'Data Operation' octet specified in the corresponding command table
record.  The length of each record and the record format are determined by 
the octet string returned by the UMC system CPU card.

---------------------------------------------------------------------------
For the command ID equal to _GetPmDataBin_, the response data  
will follow the 'General Response Data Format' as defined above.  The 
version octet = 1.  The number of records octet depends on the 'Data 
Operation' specified in the request.  For a 'GET EXACT' request, the 
response data will contain 
- a single record for a single port and bin request.
- multiple records for an all port and/or all bin request
For a Write request, the response data will contain a single record.
The format and length of each record is determined by the octet string 
returned by the UMC system CPU card.

---------------------------------------------------------------------------
For the command ID equal to _GetNBLinkStats_, the response data will 
follow the 'General Response Data Format' as defined above.  The version 
octet = 1.  The number of records octet = 1 for a Get Exact operation and 
1 - 8 (maximum number of GR303/transport link CCS data before overflowing 
the 255 byte limit) for a Get Progressive operation.  The response data 
can be one of two record types (transport link record or GR303 Group record).  
The length of each record and the record format are determined by the octet 
string returned by the UMC system CPU card (IB response payload).

---------------------------------------------------------------------------
For the command ID equal to _ManualProtectionSwitch_, the response data 
will always contain two records.  The first record has a length of one 
octet and represents the response field from the internal system interface.  
The possible values are: _RvOk_, _RvInvalidData_, & _RvFailure_.  The length 
and format of the second record are determined by the octet string returned 
by the internal system interface
   
---------------------------------------------------------------------------
For each of the following commands ID, the response data will follow the 
'General Response Data Format' as defined above.  The record format will 
consist of an octet string as returned by the CPU:
    _GetVcStatusInfo_
    _GetBlockedVccInfo_
    _GetAtmBandwidth_
    _GetAdslBitsPerTone_
    _GetDropTestResults_

---------------------------------------------------------------------------
For the command ID equal to _GenericIB_, the response data will be formatted
as follows:  
- First octet = version number = 1.  
- Second octet =  number of records octet = 1.  
- Third octet = size of record in bytes.
- Forth octet = first byte of record will contain the CPU error code.
- Fifth octet = second byte of record will contain the first byte of the IB
  payload.
- Sixth octet = third byte of record will contain the second byte of the IB
  payload.
- xth octet = last byte of the record will contain the last byte of the IB
  payload.
Note:  The third octet will be set to 1 if the CPU returns an error code
(not equal to _RvOk_) back to the IPMI via the IB response message.  The 
third octet will be set to a value of greater than 1 if the CPU returns
valid data back to the IPMI via the IB response message.  The forth octet
will contain a value of 0 (RvOk) when valid data is returned in the IB
payload.  The forth octet will contain a value greater than 0 (error type)
when the CPU identifies an error condition.

---------------------------------------------------------------------------
For the command ID equal to _GetAtmStatsPerVcc_, the response data will 
follow the 'General Response Data Format' as defined above.  The response
can contain anywhere from zero (0) response records up to six (6) response 
records.  The record format will consist of an octet string as returned by 
the CPU: