TPLINK-PORTLOOPBACKDETECTION-MIB :: loopbackDetectionRecoverPort

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TPLINK-PORTLOOPBACKDETECTION-MIB › loopbackDetectionRecoverPort

loopbackDetectionRecoverPort

Module: TPLINK-PORTLOOPBACKDETECTION-MIB

OID (symbolic): TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionRecoverPort

OID (numeric): 1.3.6.1.4.1.11863.6.80.1.4.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: You can recover the block port with this.

What is loopbackDetectionRecoverPort?

This object is used to manually clear a port out of the blocked state that loopback detection placed it in. An admin writes the port's identifier to this object to force it back into service after confirming the physical loop causing the block has been removed, which matters especially when loopbackDetectionRecoverMode is set to manual(1). For example, writing the value corresponding to port 12 here re-enables that port after the admin has traced and fixed the cabling loop.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.80.1.4.1.8
snmpwalk -v2c -c public <target> TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionRecoverPort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.80.1.4.1.8.1
snmpget -v2c -c public <target> TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionRecoverPort.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.80.1.4.1.8.1 i <value>

Start monitoring TP-LINK managed switches (loopback detection block/recovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionRecoverPort OID value, configure state conditions and alerts, and monitor any TP-LINK managed switches (loopback detection block/recovery status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11863tplinkTPLINK-MIB
1.3.6.1.4.1.11863.6tplinkMgmtTPLINK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11863.6.80tplinkLoopbackDetectionMIBTPLINK-PORTLOOPBACKDETECTION-MIB
1.3.6.1.4.1.11863.6.80.1tplinkLoopbackDetectionMIBObjectsTPLINK-PORTLOOPBACKDETECTION-MIB
1.3.6.1.4.1.11863.6.80.1.4loopbackDetectionCtrlTableTPLINK-PORTLOOPBACKDETECTION-MIB
1.3.6.1.4.1.11863.6.80.1.4.1loopbackDetectionCtrlEntryTPLINK-PORTLOOPBACKDETECTION-MIB
1.3.6.1.4.1.11863.6.80.1.4.1.8loopbackDetectionRecoverPortTPLINK-PORTLOOPBACKDETECTION-MIB