TPLINK-PORTCONFIG-MIB :: tpPortConfigDuplex

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TPLINK-PORTCONFIG-MIB › tpPortConfigDuplex

tpPortConfigDuplex

Module: TPLINK-PORTCONFIG-MIB

OID (symbolic): TPLINK-PORTCONFIG-MIB::tpPortConfigDuplex

OID (numeric): 1.3.6.1.4.1.11863.6.8.1.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object indicates the speed and duplex mode of the port. The device connected to the switch should be in the same Speed and Duplex mode with the switch. When auto is selected, the Speed and Duplex mode will be determined by auto negotiation.

What is tpPortConfigDuplex?

This read-write INTEGER selects the port's duplex mode (half/full/auto), noting the connected device should match the switch's configured speed and duplex or use auto negotiation. Admins force this to full when troubleshooting duplex mismatches that cause excessive collisions or errors. For example, setting this to full(1) on a port linked to an old device stuck in half-duplex could resolve a mismatch-related performance issue once both ends match.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.8.1.1.1.5
snmpwalk -v2c -c public <target> TPLINK-PORTCONFIG-MIB::tpPortConfigDuplex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.8.1.1.1.5.1
snmpget -v2c -c public <target> TPLINK-PORTCONFIG-MIB::tpPortConfigDuplex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.8.1.1.1.5.1 i <value>

Start monitoring TP-Link managed/smart Ethernet switch (per-port speed/duplex/LAG config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-PORTCONFIG-MIB::tpPortConfigDuplex OID value, configure state conditions and alerts, and monitor any TP-Link managed/smart Ethernet switch (per-port speed/duplex/LAG config status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11863tplinkTPLINK-MIB
1.3.6.1.4.1.11863.6tplinkMgmtTPLINK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11863.6.8tplinkPortConfigMIBTPLINK-PORTCONFIG-MIB
1.3.6.1.4.1.11863.6.8.1tplinkPortConfigMIBObjectsTPLINK-PORTCONFIG-MIB
1.3.6.1.4.1.11863.6.8.1.1tpPortConfigTableTPLINK-PORTCONFIG-MIB
1.3.6.1.4.1.11863.6.8.1.1.1tpPortConfigEntryTPLINK-PORTCONFIG-MIB
1.3.6.1.4.1.11863.6.8.1.1.1.5tpPortConfigDuplexTPLINK-PORTCONFIG-MIB