TPLINK-PIM-MIB :: tpPimStaticRpAddress

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TPLINK-PIM-MIB › tpPimStaticRpAddress

tpPimStaticRpAddress

Module: TPLINK-PIM-MIB

OID (symbolic): TPLINK-PIM-MIB::tpPimStaticRpAddress

OID (numeric): 1.3.6.1.4.1.11863.6.77.1.1.6.1

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: Specify the static RP address.

What is tpPimStaticRpAddress?

Configures a static Rendezvous Point (RP) IP address for use when dynamic RP discovery, via BSR or Auto-RP, isn't used or available.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.77.1.1.6.1
snmpwalk -v2c -c public <target> TPLINK-PIM-MIB::tpPimStaticRpAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.77.1.1.6.1.1
snmpget -v2c -c public <target> TPLINK-PIM-MIB::tpPimStaticRpAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.77.1.1.6.1.1 a <value>

Start monitoring TP-Link Layer 3 managed switch/router (PIM sparse/dense mode config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-PIM-MIB::tpPimStaticRpAddress OID value, configure state conditions and alerts, and monitor any TP-Link Layer 3 managed switch/router (PIM sparse/dense mode config status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11863tplinkTPLINK-MIB
1.3.6.1.4.1.11863.6tplinkMgmtTPLINK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11863.6.77tplinkPimMIBTPLINK-PIM-MIB
1.3.6.1.4.1.11863.6.77.1tplinkPimMIBObjectsTPLINK-PIM-MIB
1.3.6.1.4.1.11863.6.77.1.1tpPimTPLINK-PIM-MIB
1.3.6.1.4.1.11863.6.77.1.1.6tpPimStaticRpSetTPLINK-PIM-MIB
1.3.6.1.4.1.11863.6.77.1.1.6.1tpPimStaticRpAddressTPLINK-PIM-MIB