TPLINK-NDDETECTION-MIB :: ndDetectionPortConfigTrustedPort

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › TPLINK-NDDETECTION-MIB › ndDetectionPortConfigTrustedPort

ndDetectionPortConfigTrustedPort

Module: TPLINK-NDDETECTION-MIB

OID (symbolic): TPLINK-NDDETECTION-MIB::ndDetectionPortConfigTrustedPort

OID (numeric): 1.3.6.1.4.1.11863.6.93.1.3.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: 0. disable 1. enable Select Enable/Disable the port to be a Trusted Port. Only the Trusted Port can forward the Router Advertisement Message and Router Redirect Message from Routers.

What is ndDetectionPortConfigTrustedPort?

This read-write object marks a port as a Trusted Port for ND Detection, with enable(1) meaning trusted and disable(0) meaning untrusted. Per its description, only Trusted Ports are allowed to forward Router Advertisement and Router Redirect messages, so an admin uses this to control which ports may legitimately originate those IPv6 control messages. For example, an engineer would enable this only on the uplink port connected to the legitimate IPv6 router, so ND Detection blocks forged Router Advertisements arriving on any other, untrusted port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.93.1.3.1.1.2
snmpwalk -v2c -c public <target> TPLINK-NDDETECTION-MIB::ndDetectionPortConfigTrustedPort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.93.1.3.1.1.2.1
snmpget -v2c -c public <target> TPLINK-NDDETECTION-MIB::ndDetectionPortConfigTrustedPort.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.93.1.3.1.1.2.1 i <value>

Start monitoring TP-Link managed switch (IPv6 Neighbor Discovery inspection enable status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-NDDETECTION-MIB::ndDetectionPortConfigTrustedPort OID value, configure state conditions and alerts, and monitor any TP-Link managed switch (IPv6 Neighbor Discovery inspection enable status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11863tplinkTPLINK-MIB
1.3.6.1.4.1.11863.6tplinkMgmtTPLINK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11863.6.93tplinkNdDetectionMIBTPLINK-NDDETECTION-MIB
1.3.6.1.4.1.11863.6.93.1tplinkNdDetectionMIBObjectsTPLINK-NDDETECTION-MIB
1.3.6.1.4.1.11863.6.93.1.3ndDetectionPortConfigTPLINK-NDDETECTION-MIB
1.3.6.1.4.1.11863.6.93.1.3.1ndDetectionPortConfigTableTPLINK-NDDETECTION-MIB
1.3.6.1.4.1.11863.6.93.1.3.1.1ndDetectionPortConfigEntryTPLINK-NDDETECTION-MIB
1.3.6.1.4.1.11863.6.93.1.3.1.1.2ndDetectionPortConfigTrustedPortTPLINK-NDDETECTION-MIB