TPLINK-NDDETECTION-MIB DEFINITIONS ::= BEGIN

         IMPORTS
            MODULE-IDENTITY, OBJECT-TYPE
          	  	        FROM SNMPv2-SMI
          	ifIndex
						FROM RFC1213-MIB
            tplinkMgmt
						FROM TPLINK-MIB; 
	    
			tplinkNdDetectionMIB MODULE-IDENTITY
				LAST-UPDATED    "201212171014Z"
				ORGANIZATION    "TPLINK"
				CONTACT-INFO    "www.tplink.com.cn"
				DESCRIPTION	    "Private MIB for ND Detection configuration."
				REVISION        "201212171014Z"
				DESCRIPTION
				"Initial version of this MIB module."
			::= { tplinkMgmt 93 }
		
			tplinkNdDetectionMIBObjects		OBJECT IDENTIFIER	::= { tplinkNdDetectionMIB 1 }
			tplinkNdDetectionNotifications		OBJECT IDENTIFIER	::= { tplinkNdDetectionMIB 2 }
  			
  			ndDetectionGlobalConfig		OBJECT IDENTIFIER	::= { tplinkNdDetectionMIBObjects 1 }
            ndDetectionPortConfig     		OBJECT IDENTIFIER	::= { tplinkNdDetectionMIBObjects 3 }
				
				ndDetectionEnable OBJECT-TYPE
	          		SYNTAX  INTEGER{
	      				disable(0), 						
	      				enable(1)						
	      			}
	            MAX-ACCESS  read-write
	            STATUS  current
	            DESCRIPTION
	                    "0. disable 
	                     1. enable
	                     Enable or disable the ND Detection function globally."
	            ::= { ndDetectionGlobalConfig 1 }
      
				ndDetectionVlanConfigTable OBJECT-TYPE
					SYNTAX  	SEQUENCE OF NdDetectionVlanConfigTable
					MAX-ACCESS  not-accessible
					STATUS  	current
					DESCRIPTION
							"Here you can view and modify the ND Detection VLAN config table."
				::= { ndDetectionGlobalConfig 2 }

				ndDetectionVlanConfigEntry OBJECT-TYPE
					SYNTAX  	NdDetectionVlanConfigTable
					MAX-ACCESS  not-accessible
					STATUS  	current
					DESCRIPTION
							"An entry contains of the ND Detection function enable status information of a VLAN."
					INDEX   { ndDetectionVlanId }
				::= { ndDetectionVlanConfigTable 1 }

				NdDetectionVlanConfigTable ::=
					SEQUENCE {
						ndDetectionVlanId
								INTEGER(1..4094),
						ndDetectionVlanStatus
								INTEGER
					}

				ndDetectionVlanId OBJECT-TYPE
					SYNTAX 	 	INTEGER(1..4094)
					MAX-ACCESS  read-create
					STATUS  	current
					DESCRIPTION
							"Enter the ID number of VLAN,1-4094."
				::= { ndDetectionVlanConfigEntry 1 }
				
        		ndDetectionVlanStatus OBJECT-TYPE
	          		SYNTAX  INTEGER{
	      				disable(0), 						
	      				enable(1)						
	      			}
	            	MAX-ACCESS  read-create
	            	STATUS  current
	            	DESCRIPTION
	                    "0. disable 
	                     1. enable
	                     Enable or disable ND Detection function in specified VLAN. "
	            ::= { ndDetectionVlanConfigEntry 2 }	            
       -- the ND Detection port config
         
       			ndDetectionPortConfigTable OBJECT-TYPE
          			SYNTAX  SEQUENCE OF NdDetectionPortConfigEntry
          			MAX-ACCESS  not-accessible
          			STATUS  current
          			DESCRIPTION
                  		"A list of ND Detection port config entries.
                   		Here you can configure the port parameters for the ND Detection."
          		::= { ndDetectionPortConfig 1 }

      			ndDetectionPortConfigEntry OBJECT-TYPE
          			SYNTAX  NdDetectionPortConfigEntry
          			MAX-ACCESS  not-accessible
          			STATUS  current
          			DESCRIPTION
                  		"An entry contains of the information of ND Detection port config."
          			INDEX   {ifIndex}
          		::= { ndDetectionPortConfigTable 1 }
  
      			NdDetectionPortConfigEntry ::=
          			SEQUENCE {
          					ndDetectionPort
          						    OCTET STRING (SIZE (0..255)),
							ndDetectionPortConfigTrustedPort
									INTEGER, 
							ndDetectionPortConfigPortLag
									OCTET STRING  
          			}
          			
                ndDetectionPort OBJECT-TYPE
					SYNTAX  	OCTET STRING (SIZE (0..255))
					MAX-ACCESS  read-only
					STATUS  	current
					DESCRIPTION
						"Display port number"
				::= { ndDetectionPortConfigEntry 1 }
               
      			ndDetectionPortConfigTrustedPort OBJECT-TYPE
          			SYNTAX  INTEGER{
      					disable(0), 						
      					enable(1)			
      				}
          			MAX-ACCESS  read-write
          			STATUS  current
          			DESCRIPTION
                  		"0. disable
                   		 1. enable
                   		 Select Enable/Disable the port to be a Trusted Port. 
                   		 Only the Trusted Port can forward the Router Advertisement Message and Router Redirect Message from Routers."
          		::= { ndDetectionPortConfigEntry 2 }
       
      			ndDetectionPortConfigPortLag OBJECT-TYPE
            		SYNTAX  OCTET STRING (SIZE (1..255))  
            		MAX-ACCESS  read-only
            		STATUS  current
            		DESCRIPTION
                    	"The LAG to which the port belongs to."
            	::= { ndDetectionPortConfigEntry 3 }
          
END