All MIBs › TPLINK-LLDPMEDCONFIG-MIB › lldpMedConfigPortLocationCivicAddressWhat
lldpMedConfigPortLocationCivicAddressWhat
Module: TPLINK-LLDPMEDCONFIG-MIB
OID (symbolic): TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressWhat
OID (numeric): 1.3.6.1.4.1.11863.6.35.1.4.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This element describes which location the DHCP entry refers to. Currently, three options are defined: the location of the DHCP server (0: DHCP server), the location of the network element believed to be closest to the client (1: Switch) or the location of the client (2: LLDP-MED Endpoint). Option (2) should be used, but may not be known. Options (0) and (1) should not be used unless it is known that the DHCP client is in close physical proximity to the server or network element.
What is lldpMedConfigPortLocationCivicAddressWhat?
This sets which location the civic-address data on this port actually describes: the DHCP server's location (0), the network element (switch) believed closest to the client (1), or the LLDP-MED endpoint (client) itself (2). The MIB recommends using option 2 when the endpoint's own location is known, since options 0 and 1 are only appropriate when the DHCP client is physically close to the server or switch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.35.1.4.3.1.3 snmpwalk -v2c -c public <target> TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressWhat
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.35.1.4.3.1.3.1 snmpget -v2c -c public <target> TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressWhat.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.35.1.4.3.1.3.1 i <value>
Start monitoring TP-Link managed Ethernet switch (LLDP-MED voice-VLAN/QoS policy status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressWhat OID value, configure state conditions and alerts, and monitor any TP-Link managed Ethernet switch (LLDP-MED voice-VLAN/QoS policy status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6.35 | tplinkLldpMIB | TPLINK-LLDP-MIB |
| 1.3.6.1.4.1.11863.6.35.1 | tplinkLldpMIBObjects | TPLINK-LLDP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.35.1.4 | lldpMed | TPLINK-LLDPMEDCONFIG-MIB |
| 1.3.6.1.4.1.11863.6.35.1.4.3 | lldpMedPortConfigTlvLocationTable | TPLINK-LLDPMEDCONFIG-MIB |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1 | lldpMedPortConfigTlvLocationEntry | TPLINK-LLDPMEDCONFIG-MIB |
| 1.3.6.1.4.1.11863.6.35.1.4.3.1.3 | lldpMedConfigPortLocationCivicAddressWhat | TPLINK-LLDPMEDCONFIG-MIB |