All MIBs › TPLINK-ETHERNETOAMRFICFG-MIB › ethernetOamRfiCfgDyingGaspNotify
ethernetOamRfiCfgDyingGaspNotify
Module: TPLINK-ETHERNETOAMRFICFG-MIB
OID (symbolic): TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgDyingGaspNotify
OID (numeric): 1.3.6.1.4.1.11863.6.60.1.3.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Select to enable or disable the event notification when critical link event is Dying Gasp.
What is ethernetOamRfiCfgDyingGaspNotify?
This value enables or disables sending an OAM event notification when a Dying Gasp critical link event occurs, using disable(0) or enable(1); per the source, Dying Gasp is one of the flag values OAMPDUs use to signal an emergency link event such as sudden power loss. A network administrator enables this so a remote peer or NMS is alerted immediately when a device is about to lose power. For example, setting ethernetOamRfiCfgDyingGaspNotify to enable(1) on a remote-site switch ensures the far end gets an OAM notification the instant that switch loses power and starts shutting down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.60.1.3.1.1.2 snmpwalk -v2c -c public <target> TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgDyingGaspNotify
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.60.1.3.1.1.2.1 snmpget -v2c -c public <target> TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgDyingGaspNotify.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.60.1.3.1.1.2.1 i <value>
Start monitoring TP-Link managed switch (OAM Remote Failure Indication/dying-gasp config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgDyingGaspNotify OID value, configure state conditions and alerts, and monitor any TP-Link managed switch (OAM Remote Failure Indication/dying-gasp config status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6.60 | tplinkEthernetOam | TPLINK-ETHERNETOAM-MIB |
| 1.3.6.1.4.1.11863.6.60.1 | tplinkEthernetOamMIBObjects | TPLINK-ETHERNETOAM-MIB |
| 1.3.6.1.4.1.11863.6.60.1.3 | ethernetOamRfiConfig | TPLINK-ETHERNETOAM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.60.1.3.1 | ethernetOamRfiCfgTable | TPLINK-ETHERNETOAMRFICFG-MIB |
| 1.3.6.1.4.1.11863.6.60.1.3.1.1 | ethernetOamRfiCfgEntry | TPLINK-ETHERNETOAMRFICFG-MIB |
| 1.3.6.1.4.1.11863.6.60.1.3.1.1.2 | ethernetOamRfiCfgDyingGaspNotify | TPLINK-ETHERNETOAMRFICFG-MIB |