All MIBs › TPLINK-ETHERNETOAMRFICFG-MIB › ethernetOamRfiCfgCriticalEventNotify
ethernetOamRfiCfgCriticalEventNotify
Module: TPLINK-ETHERNETOAMRFICFG-MIB
OID (symbolic): TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgCriticalEventNotify
OID (numeric): 1.3.6.1.4.1.11863.6.60.1.3.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Select to enable or disable the event notification when critical link event is Critical Event.
What is ethernetOamRfiCfgCriticalEventNotify?
This value enables or disables sending an OAM event notification when a generic Critical Event link fault occurs, using disable(0) or enable(1), as the counterpart to the more specific Dying Gasp notification in this same RFI configuration table. An administrator enables this to get early warning of serious link-level faults on OAM-monitored Ethernet connections, distinct from a power-loss-specific Dying Gasp. For example, setting this to enable(1) means the switch will emit an OAM notification whenever it detects a critical fault condition on that port other than power loss.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.60.1.3.1.1.3 snmpwalk -v2c -c public <target> TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgCriticalEventNotify
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.60.1.3.1.1.3.1 snmpget -v2c -c public <target> TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgCriticalEventNotify.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.60.1.3.1.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ethernetOamRfiCfgCriticalEventNotify.1
Start monitoring TP-Link managed switch (OAM Remote Failure Indication/dying-gasp config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgCriticalEventNotify OID value, configure state conditions and alerts, and monitor any TP-Link managed switch (OAM Remote Failure Indication/dying-gasp config status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6.60 | tplinkEthernetOam | TPLINK-ETHERNETOAM-MIB |
| 1.3.6.1.4.1.11863.6.60.1 | tplinkEthernetOamMIBObjects | TPLINK-ETHERNETOAM-MIB |
| 1.3.6.1.4.1.11863.6.60.1.3 | ethernetOamRfiConfig | TPLINK-ETHERNETOAM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.60.1.3.1 | ethernetOamRfiCfgTable | TPLINK-ETHERNETOAMRFICFG-MIB |
| 1.3.6.1.4.1.11863.6.60.1.3.1.1 | ethernetOamRfiCfgEntry | TPLINK-ETHERNETOAMRFICFG-MIB |
| 1.3.6.1.4.1.11863.6.60.1.3.1.1.3 | ethernetOamRfiCfgCriticalEventNotify | TPLINK-ETHERNETOAMRFICFG-MIB |