TPLINK-ETHERNETOAMLINKMONCFG-MIB :: ethernetOamLinkMonCfgThreshold

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › TPLINK-ETHERNETOAMLINKMONCFG-MIB › ethernetOamLinkMonCfgThreshold

ethernetOamLinkMonCfgThreshold

Module: TPLINK-ETHERNETOAMLINKMONCFG-MIB

OID (symbolic): TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgThreshold

OID (numeric): 1.3.6.1.4.1.11863.6.60.1.2.1.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Enter the number of errors that is required to be equal to or greater than in order for the event to be generated.

What is ethernetOamLinkMonCfgThreshold?

This read-write Unsigned32 sets the number of errors that must be equal to or greater than this value for the associated link-monitoring event to be generated. Admins tune this to control sensitivity of Ethernet OAM link-fault detection on a port. For example, lowering this threshold makes the switch raise a link-event notification after fewer detected errors.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.60.1.2.1.1.3
snmpwalk -v2c -c public <target> TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.60.1.2.1.1.3.1
snmpget -v2c -c public <target> TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.60.1.2.1.1.3.1 i <value>

Start monitoring TP-Link managed switch supporting IEEE 802.3ah Ethernet OAM (link-monitoring error-threshold status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgThreshold OID value, configure state conditions and alerts, and monitor any TP-Link managed switch supporting IEEE 802.3ah Ethernet OAM (link-monitoring error-threshold status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11863tplinkTPLINK-MIB
1.3.6.1.4.1.11863.6tplinkMgmtTPLINK-MIB
1.3.6.1.4.1.11863.6.60tplinkEthernetOamTPLINK-ETHERNETOAM-MIB
1.3.6.1.4.1.11863.6.60.1tplinkEthernetOamMIBObjectsTPLINK-ETHERNETOAM-MIB
1.3.6.1.4.1.11863.6.60.1.2ethernetOamLinkMonConfigTPLINK-ETHERNETOAM-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11863.6.60.1.2.1ethernetOamLinkMonCfgTableTPLINK-ETHERNETOAMLINKMONCFG-MIB
1.3.6.1.4.1.11863.6.60.1.2.1.1ethernetOamLinkMonCfgEntryTPLINK-ETHERNETOAMLINKMONCFG-MIB
1.3.6.1.4.1.11863.6.60.1.2.1.1.3ethernetOamLinkMonCfgThresholdTPLINK-ETHERNETOAMLINKMONCFG-MIB