All MIBs › TFTP-OPT-MIB › cdx6500ContTFTPoperation
cdx6500ContTFTPoperation
Module: TFTP-OPT-MIB
OID (symbolic): TFTP-OPT-MIB::cdx6500ContTFTPoperation
OID (numeric): 1.3.6.1.4.1.449.2.1.4.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Type and target of the TFTP transfer, configuration download, configuration upload, software download, current or alternate bank. Configuration transfers will only be supported to/from the current bank at release 4.0. Note that value 'noOperation' is not valid for the write operation.
What is cdx6500ContTFTPoperation?
This read-write enumerated value sets the type and target of a TFTP transfer to initiate on the device, such as configuration download or software download to the current or alternate bank. An admin sets this value together with the IP address and filename control objects to configure which operation will run, though per its description the noOperation(100) value cannot be written here. For example, an admin would set this to softwareDownloadToAlternateBank(6) before triggering a firmware upgrade that loads a new image into the standby bank.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.4.2.1 snmpwalk -v2c -c public <target> TFTP-OPT-MIB::cdx6500ContTFTPoperation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.4.2.1.1 snmpget -v2c -c public <target> TFTP-OPT-MIB::cdx6500ContTFTPoperation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.449.2.1.4.2.1.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, generic device running a TFTP client or server (option negotiation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TFTP-OPT-MIB::cdx6500ContTFTPoperation OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, generic device running a TFTP client or server (option negotiation) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.4 | cdx6500Controls | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.4.2 | cdx6500ContTFTP | CDX-6500-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.4.2.1 | cdx6500ContTFTPoperation | TFTP-OPT-MIB |