All MIBs › TERAWAVE-teraCon-MIB › secondInternalVCI
secondInternalVCI
Module: TERAWAVE-teraCon-MIB
OID (symbolic): TERAWAVE-teraCon-MIB::secondInternalVCI
OID (numeric): 1.3.6.1.4.1.4513.2.1.2.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
What is secondInternalVCI?
This is the internal (device-side) ATM VCI the switch fabric actually uses for the second endpoint of this circuit, distinct from the externally-configured secondCONVCI. It's a read-only diagnostic value for the circuit's internal switching path at the second endpoint.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4513.2.1.2.15 snmpwalk -v2c -c public <target> TERAWAVE-teraCon-MIB::secondInternalVCI
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4513.2.1.2.15.1 snmpget -v2c -c public <target> TERAWAVE-teraCon-MIB::secondInternalVCI.1
Start monitoring Terawave teraAccess DSL/ATM access platform (circuit-to-VPI/VCI provisioning status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TERAWAVE-teraCon-MIB::secondInternalVCI OID value, configure state conditions and alerts, and monitor any Terawave teraAccess DSL/ATM access platform (circuit-to-VPI/VCI provisioning status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4513 | terawave | TERAWAVE-teraces-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4513.2 | connections | TERAWAVE-teraCon-MIB |
| 1.3.6.1.4.1.4513.2.1 | conTable | TERAWAVE-teraCon-MIB |
| 1.3.6.1.4.1.4513.2.1.2 | conTableEntry | TERAWAVE-teraCon-MIB |
| 1.3.6.1.4.1.4513.2.1.2.15 | secondInternalVCI | TERAWAVE-teraCon-MIB |