All MIBs › TERAWAVE-teraCon-MIB › secondCONVPI
secondCONVPI
Module: TERAWAVE-teraCon-MIB
OID (symbolic): TERAWAVE-teraCon-MIB::secondCONVPI
OID (numeric): 1.3.6.1.4.1.4513.2.1.2.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is secondCONVPI?
This is the ATM Virtual Path Identifier (VPI) configured on the second endpoint of this circuit, used when that endpoint is an ATM PVC. It pairs with secondCONVCI to identify the ATM virtual circuit at the second (Z-side) interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4513.2.1.2.8 snmpwalk -v2c -c public <target> TERAWAVE-teraCon-MIB::secondCONVPI
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4513.2.1.2.8.1 snmpget -v2c -c public <target> TERAWAVE-teraCon-MIB::secondCONVPI.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4513.2.1.2.8.1 i <value>
Start monitoring Terawave teraAccess DSL/ATM access platform (circuit-to-VPI/VCI provisioning status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TERAWAVE-teraCon-MIB::secondCONVPI OID value, configure state conditions and alerts, and monitor any Terawave teraAccess DSL/ATM access platform (circuit-to-VPI/VCI provisioning status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4513 | terawave | TERAWAVE-teraces-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4513.2 | connections | TERAWAVE-teraCon-MIB |
| 1.3.6.1.4.1.4513.2.1 | conTable | TERAWAVE-teraCon-MIB |
| 1.3.6.1.4.1.4513.2.1.2 | conTableEntry | TERAWAVE-teraCon-MIB |
| 1.3.6.1.4.1.4513.2.1.2.8 | secondCONVPI | TERAWAVE-teraCon-MIB |