All MIBs › TELDAT-MON-FEATURES-DNS-MIB › teldatDNSMonProbeResetPPPAndStartCommand
teldatDNSMonProbeResetPPPAndStartCommand
Module: TELDAT-MON-FEATURES-DNS-MIB
OID (symbolic): TELDAT-MON-FEATURES-DNS-MIB::teldatDNSMonProbeResetPPPAndStartCommand
OID (numeric): 1.3.6.1.4.1.2007.4.1.2.4.8.1.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If the value of this variable is set to 1, the PPP connection established through the interface given by the index will be disconnect and the DNS probe given by the other index will be started once the PPP connection restablishes. In GET operations, the value taken by this variable indicates the result of the last operation: ok (2), if the last operation was made succesfully; the value undefined (3) indicates that operations of this type have not been made yet. If the operation failed, this variable could take different values depending on the error cause: no-memory (4), if there was not enough memory to start the DNS probe; wrong-identifier(5) if the probe identifier introduced was not correct; already-started (6) indicates that the probe which was going to be started was started previously and is in execution; dns-uninitialized (7) if the DNS system has not been initialized; error (8) if another generic error has occurred.
What is teldatDNSMonProbeResetPPPAndStartCommand?
This is a command object that, when set to start, disconnects the specified PPP interface and then starts the associated DNS probe once the PPP connection re-establishes, and on read reports the result of the last such operation. Admins use it to test DNS resolution specifically after a fresh PPP reconnection, useful for diagnosing DNS issues tied to dial-up or PPPoE link re-establishment. If a GET on teldatDNSMonProbeResetPPPAndStartCommand returns dns-uninitialized(7), the admin knows the DNS subsystem wasn't ready when the combined reset-and-test action was attempted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.4.8.1.3.1.3 snmpwalk -v2c -c public <target> TELDAT-MON-FEATURES-DNS-MIB::teldatDNSMonProbeResetPPPAndStartCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.4.8.1.3.1.3.1 snmpget -v2c -c public <target> TELDAT-MON-FEATURES-DNS-MIB::teldatDNSMonProbeResetPPPAndStartCommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2007.4.1.2.4.8.1.3.1.3.1 i <value>
Start monitoring Teldat router (DNS resolver/cache service status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-MON-FEATURES-DNS-MIB::teldatDNSMonProbeResetPPPAndStartCommand OID value, configure state conditions and alerts, and monitor any Teldat router (DNS resolver/cache service status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2007 | teldat | TELDAT-MIB |
| 1.3.6.1.4.1.2007.4 | telproducts | TELDAT-MIB |
| 1.3.6.1.4.1.2007.4.1 | telProductsNucleox | TELDAT-SW-STRUCTURE-MIB |
| 1.3.6.1.4.1.2007.4.1.2 | telProductsNpMonit | TELDAT-SW-STRUCTURE-MIB |
| 1.3.6.1.4.1.2007.4.1.2.4 | telProdNpMonFeatures | TELDAT-SW-STRUCTURE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2007.4.1.2.4.8 | telProdNpMonFeatDNS | TELDAT-MON-FEATURES-DNS-MIB |
| 1.3.6.1.4.1.2007.4.1.2.4.8.1 | teldatDNSMonProbeGroup | TELDAT-MON-FEATURES-DNS-MIB |
| 1.3.6.1.4.1.2007.4.1.2.4.8.1.3 | teldatDNSMonProbeResetPPPAndStartTable | TELDAT-MON-FEATURES-DNS-MIB |
| 1.3.6.1.4.1.2007.4.1.2.4.8.1.3.1 | teldatDNSMonProbeResetPPPAndStartEntry | TELDAT-MON-FEATURES-DNS-MIB |
| 1.3.6.1.4.1.2007.4.1.2.4.8.1.3.1.3 | teldatDNSMonProbeResetPPPAndStartCommand | TELDAT-MON-FEATURES-DNS-MIB |