TCOP-OPT-MIB :: cdx6500TCOPStatAutoCallLastClearCause

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTCOP-OPT-MIBcdx6500TCOPStatAutoCallLastClearCause

cdx6500TCOPStatAutoCallLastClearCause

Module: TCOP-OPT-MIB

OID (symbolic): TCOP-OPT-MIB::cdx6500TCOPStatAutoCallLastClearCause

OID (numeric): 1.3.6.1.4.1.449.2.1.3.1.1.24.1.29

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Last autocall clear cause code dte - Cleared by other end np - Destination not obtainable occ - Called number busy nc - Network congested inv - Invalid facility requested na - Access barred err - Local procedure error rpe - Remote procedure error der - Called number out of order rna - Reverse charging not accepted roo - RPOA out of order icd - Incompatible destination fsn - Fast select acceptance not subscribed ctp - Control port intervention sha - Ship absent.

What is cdx6500TCOPStatAutoCallLastClearCause?

This reports the X.25-style cause code for why the last call on this port was cleared, for example occ (called number busy) or nc (network congested), helping diagnose why a dial-up X.25 session dropped.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.1.24.1.29
snmpwalk -v2c -c public <target> TCOP-OPT-MIB::cdx6500TCOPStatAutoCallLastClearCause

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.1.24.1.29.1
snmpget -v2c -c public <target> TCOP-OPT-MIB::cdx6500TCOPStatAutoCallLastClearCause.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cdx6500TCOPStatAutoCallLastClearCause.1

Start monitoring Codex (Motorola Codex) 6500-series multiplexer/data communications chassis (TCOP port protocol config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TCOP-OPT-MIB::cdx6500TCOPStatAutoCallLastClearCause OID value, configure state conditions and alerts, and monitor any Codex (Motorola Codex) 6500-series multiplexer/data communications chassis (TCOP port protocol config) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.449codexALC-OPT-MIB
1.3.6.1.4.1.449.2cdxProductSpecificALC-OPT-MIB
1.3.6.1.4.1.449.2.1cdx6500ALC-OPT-MIB
1.3.6.1.4.1.449.2.1.3cdx6500StatisticsALC-OPT-MIB
1.3.6.1.4.1.449.2.1.3.1cdx6500StatProtocolGroupALC-OPT-MIB
1.3.6.1.4.1.449.2.1.3.1.1cdx6500PSTPortProtocolGroupALC-OPT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.449.2.1.3.1.1.24cdx6500PPSTTCOPPortTableTCOP-OPT-MIB
1.3.6.1.4.1.449.2.1.3.1.1.24.1cdx6500PPSTTCOPPortEntryTCOP-OPT-MIB
1.3.6.1.4.1.449.2.1.3.1.1.24.1.29cdx6500TCOPStatAutoCallLastClearCauseTCOP-OPT-MIB