All MIBs › TAIT-INFRA93SERIES-MIB › rctRfReceiverSelectedFrequencyResponse
rctRfReceiverSelectedFrequencyResponse
Module: TAIT-INFRA93SERIES-MIB
OID (symbolic): TAIT-INFRA93SERIES-MIB::rctRfReceiverSelectedFrequencyResponse
OID (numeric): 1.3.6.1.4.1.3570.2.2.2.1.2.2.4.12
Node type: OBJECT-TYPE
Type: RxFrequencyResponse
Access: read-only
Description: Specifies the receive baseband frequency response that applies to the channel. MPT Control channels have a flat speech charactieristic. MPT Traffic channels have a de-emphasis characteristic. Conventional analog channels take their setting from channel profile configuration. 'Flat speech' applies a constant gain to frequencies in the speech band (high pass above 300 Hz). 'De-emph speech' is a de-emphasis characteristic over the speech band (high pass above 300 Hz).
What is rctRfReceiverSelectedFrequencyResponse?
Reports which baseband receive frequency response curve is applied to the channel: a flat-speech characteristic used on MPT control channels, or a de-emphasis characteristic used on MPT traffic channels (conventional analog channels instead inherit this from their channel profile). Admins check this when diagnosing audio quality complaints, since a mismatched frequency-response setting produces muffled or overly bright received audio.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3570.2.2.2.1.2.2.4.12 snmpwalk -v2c -c public <target> TAIT-INFRA93SERIES-MIB::rctRfReceiverSelectedFrequencyResponse
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3570.2.2.2.1.2.2.4.12.1 snmpget -v2c -c public <target> TAIT-INFRA93SERIES-MIB::rctRfReceiverSelectedFrequencyResponse.1
Start monitoring Tait TB93XX-series DMR/analog base station (license/RF-status/RSSI monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TAIT-INFRA93SERIES-MIB::rctRfReceiverSelectedFrequencyResponse OID value, configure state conditions and alerts, and monitor any Tait TB93XX-series DMR/analog base station (license/RF-status/RSSI monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3570 | tait | TAIT-COMMON-MIB |
| 1.3.6.1.4.1.3570.2 | taitGeneric | TAIT-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3570.2.2 | infra93MIB | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2 | monitored | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1 | mibObjects | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1.2 | modules | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1.2.2 | reciter | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1.2.2.4 | rctRfReceiver | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1.2.2.4.12 | rctRfReceiverSelectedFrequencyResponse | TAIT-INFRA93SERIES-MIB |