All MIBs › TAIT-INFRA93SERIES-MIB › linkInfoCtrlProtocolStatus
linkInfoCtrlProtocolStatus
Module: TAIT-INFRA93SERIES-MIB
OID (symbolic): TAIT-INFRA93SERIES-MIB::linkInfoCtrlProtocolStatus
OID (numeric): 1.3.6.1.4.1.3570.2.2.2.1.4.1.1.1
Node type: OBJECT-TYPE
Type: ControlProtocolStatus
Access: read-only
Description: The status of the base station as reported to the node using the control protocol. Range: unconnected(0): The base station is not under node control. deprecatedUnconnected(1): DEPRECATED - The base station is not in contact with a node. standby(2): The base station is in contact with a node. Its air interface is not transmitting or receiving. dmr-aligned(3): The base station is transmitting a framesync structure together with an idle pattern or a payload. dmr-offset(4): Not currently used. dmr-two-slot-data(5): The base station is carrying a data call that uses both logical channels. dmr-hibernate(6): the base station is hibernating analogue(7): Not currently used. test-mode(8): Reserved. dmr-tier2-aligned(9): The base station is transmitting a framesync struture for Tier 2 operation
What is linkInfoCtrlProtocolStatus?
Reports the base station's status as seen by the controlling node over the control protocol, covering states from unconnected(0) through standby(2), various DMR-aligned states, hibernate(6), and reserved test-mode(8). Admins use this as a primary health indicator for the node-to-base-station link, since anything other than the expected operating state (e.g., dmr-aligned) usually points to a network or node connectivity problem.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3570.2.2.2.1.4.1.1.1 snmpwalk -v2c -c public <target> TAIT-INFRA93SERIES-MIB::linkInfoCtrlProtocolStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3570.2.2.2.1.4.1.1.1.1 snmpget -v2c -c public <target> TAIT-INFRA93SERIES-MIB::linkInfoCtrlProtocolStatus.1
Start monitoring Tait TB93XX-series DMR/analog base station (license/RF-status/RSSI monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TAIT-INFRA93SERIES-MIB::linkInfoCtrlProtocolStatus OID value, configure state conditions and alerts, and monitor any Tait TB93XX-series DMR/analog base station (license/RF-status/RSSI monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3570 | tait | TAIT-COMMON-MIB |
| 1.3.6.1.4.1.3570.2 | taitGeneric | TAIT-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3570.2.2 | infra93MIB | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2 | monitored | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1 | mibObjects | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1.4 | networkLinks | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1.4.1 | networkLinksSummary | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1.4.1.1 | linkInfo | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1.4.1.1.1 | linkInfoCtrlProtocolStatus | TAIT-INFRA93SERIES-MIB |