All MIBs › TAIT-INFRA93SERIES-MIB › customAlarm3
customAlarm3
Module: TAIT-INFRA93SERIES-MIB
OID (symbolic): TAIT-INFRA93SERIES-MIB::customAlarm3
OID (numeric): 1.3.6.1.4.1.3570.2.2.2.1.3.6.3
Node type: OBJECT-TYPE
Type: AlarmState
Access: read-only
Description: Custom alarm 3. The state of digital input 3 has changed, triggering this alarm. This occurs when external equipment has been connected to the input. When configured as 'active high', a custom alarm is triggered when its input goes to 'high' (4.75V) and it is cleared when its input goes to 'low'. When configured as 'active low', a custom alarm is triggered when its input goes to 'low' (0V) and it is cleared when its input goes to 'high'. Range: unavailable(0), cleared(1), raised(2), disabled(3)
What is customAlarm3?
Reports the state of external digital input 3, used for site-specific monitoring (such as a door contact or generator sensor) wired into the base station's custom alarm inputs. Depending on whether the input is configured 'active high' or 'active low', the alarm raises on a high (4.75V) or low (0V) signal respectively and clears on the opposite state. Admins map this specific object to whatever equipment is wired to input 3 and treat a raised(2) value as that external condition being triggered.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3570.2.2.2.1.3.6.3 snmpwalk -v2c -c public <target> TAIT-INFRA93SERIES-MIB::customAlarm3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3570.2.2.2.1.3.6.3.1 snmpget -v2c -c public <target> TAIT-INFRA93SERIES-MIB::customAlarm3.1
Start monitoring Tait TB93XX-series DMR/analog base station (license/RF-status/RSSI monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TAIT-INFRA93SERIES-MIB::customAlarm3 OID value, configure state conditions and alerts, and monitor any Tait TB93XX-series DMR/analog base station (license/RF-status/RSSI monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3570 | tait | TAIT-COMMON-MIB |
| 1.3.6.1.4.1.3570.2 | taitGeneric | TAIT-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3570.2.2 | infra93MIB | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2 | monitored | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1 | mibObjects | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1.3 | alarms | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1.3.6 | customAlarms | TAIT-INFRA93SERIES-MIB |
| 1.3.6.1.4.1.3570.2.2.2.1.3.6.3 | customAlarm3 | TAIT-INFRA93SERIES-MIB |