All MIBs › T1-OPT-MIB › cdx6500T1StatRxLastCallFailureCause
cdx6500T1StatRxLastCallFailureCause
Module: T1-OPT-MIB
OID (symbolic): T1-OPT-MIB::cdx6500T1StatRxLastCallFailureCause
OID (numeric): 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The reason the last inbound call was rejected, since the last statistics reset. The posssible values are: noFailureReported : No call failure noAvailableVirtualPort : No Virtual Port available securityViolation : Password/Calling ID security failed noResourcesAvailable : No resources available callRejected : Call failed by Xircom card invalidPhoneNumber : Incorrect phone number outgoingCallRequestTimeout : Outgoing call request timed out callCollision : A call collision occurred virtualPortNotAvailable : Virtual port not available invalidConfiguration : Invalid configuration na : Value not available
What is cdx6500T1StatRxLastCallFailureCause?
The reason the most recent inbound call on this port was rejected, e.g. no available virtual port, a security/password failure, or no resources available; na means the value isn't available. The specific cause narrows down whether a rejected call is a capacity, security, or configuration issue.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.4 snmpwalk -v2c -c public <target> T1-OPT-MIB::cdx6500T1StatRxLastCallFailureCause
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.4.1 snmpget -v2c -c public <target> T1-OPT-MIB::cdx6500T1StatRxLastCallFailureCause.1
Start monitoring Codex (Motorola Codex) 6500-series multiplexer/data communications chassis (T1 physical-port config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T1-OPT-MIB::cdx6500T1StatRxLastCallFailureCause OID value, configure state conditions and alerts, and monitor any Codex (Motorola Codex) 6500-series multiplexer/data communications chassis (T1 physical-port config) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3 | cdx6500Statistics | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1 | cdx6500StatProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.1 | cdx6500PSTPortProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.1.25 | cdx6500PSTT1E1PortTable | CDX6500T1E1-OPT-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7 | cdx6500T1ISDNStatusTable | T1-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1 | cdx6500T1StatISDNStatusEntry | T1-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.4 | cdx6500T1StatRxLastCallFailureCause | T1-OPT-MIB |