T1-OPT-MIB :: cdx6500T1CfgSwitchType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › T1-OPT-MIB › cdx6500T1CfgSwitchType

cdx6500T1CfgSwitchType

Module: T1-OPT-MIB

OID (symbolic): T1-OPT-MIB::cdx6500T1CfgSwitchType

OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.19

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The ISDN switch type. This specifies the type of equipment to which this span is connected. The possible choices are: att4ess : AT&T 4ESS Switch att5ess : AT&T 5ESS Switch ntDms100 : Northern Telecom DMS-100 Switch ntDms250 : Northern Telecom DMS-250 Switch md110Us : Ericsson MD-110 (North America) md110 : Ericsson MD-110 (International) siemens : Siemens EWSD Switch (U.S.) ntt : Nippon Telephone and Telegraph switch (Japan) unknown : Unknown Switch Type nc : Skipped during configuration

What is cdx6500T1CfgSwitchType?

Selects the ISDN switch type the far end of this T1/PRI is emulating, e.g. AT&T 4ESS/5ESS, Nortel DMS-100/250, Ericsson MD-110, Siemens EWSD, or NTT; nc means it was skipped during configuration. Must match the actual carrier switch or ISDN call signaling will fail.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.19
snmpwalk -v2c -c public <target> T1-OPT-MIB::cdx6500T1CfgSwitchType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.19.1
snmpget -v2c -c public <target> T1-OPT-MIB::cdx6500T1CfgSwitchType.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cdx6500T1CfgSwitchType.1

Start monitoring Codex (Motorola Codex) 6500-series multiplexer/data communications chassis (T1 physical-port config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T1-OPT-MIB::cdx6500T1CfgSwitchType OID value, configure state conditions and alerts, and monitor any Codex (Motorola Codex) 6500-series multiplexer/data communications chassis (T1 physical-port config) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.449codexALC-OPT-MIB
1.3.6.1.4.1.449.2cdxProductSpecificALC-OPT-MIB
1.3.6.1.4.1.449.2.1cdx6500ALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2cdx6500ConfigurationALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1cdx6500CfgProtocolGroupALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1cdx6500PCTPortProtocolGroupALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.24cdx6500PCTT1E1PortTableCDX6500T1E1-OPT-SMI
Numeric OIDNameModule
1.3.6.1.4.1.449.2.1.2.1.1.24.1cdx6500PCTT1PortTableT1-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.24.1.1cdx6500PPCTT1PortTableT1-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1cdx6500PPCTT1PortEntryT1-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.19cdx6500T1CfgSwitchTypeT1-OPT-MIB