All MIBs › Sentry3-MIB › systemPowerFactor
systemPowerFactor
Module: Sentry3-MIB
OID (symbolic): Sentry3-MIB::systemPowerFactor
OID (numeric): 1.3.6.1.4.1.1718.3.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The power factor used in power calculations performed by the system.
What is systemPowerFactor?
Sets the power factor, in hundredths, that the system uses in its internal power calculations for equipment that does not itself report a measured power factor.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1718.3.1.10 snmpwalk -v2c -c public <target> Sentry3-MIB::systemPowerFactor
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1718.3.1.10.1 snmpget -v2c -c public <target> Sentry3-MIB::systemPowerFactor.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1718.3.1.10.1 i <value>
Start monitoring Server Technology Sentry3 PDUs (RPM, PDU, EM, CDU, Switched -48VDC) (outlet power/environmental sensor status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Sentry3-MIB::systemPowerFactor OID value, configure state conditions and alerts, and monitor any Server Technology Sentry3 PDUs (RPM, PDU, EM, CDU, Switched -48VDC) (outlet power/environmental sensor status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1718 | serverTech | Sentry3-MIB |
| 1.3.6.1.4.1.1718.3 | sentry3 | Sentry3-MIB |
| 1.3.6.1.4.1.1718.3.1 | systemGroup | Sentry3-MIB |
| 1.3.6.1.4.1.1718.3.1.10 | systemPowerFactor | Sentry3-MIB |