All MIBs › Sentry3-MIB › systemOutletSeqInterval
systemOutletSeqInterval
Module: Sentry3-MIB
OID (symbolic): Sentry3-MIB::systemOutletSeqInterval
OID (numeric): 1.3.6.1.4.1.1718.3.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The power-on sequencing interval for all outlets.
What is systemOutletSeqInterval?
Sets the delay, in seconds, inserted between each outlet turning on during a power-up sequencing operation, so that outlets aren't all energized simultaneously.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1718.3.1.13 snmpwalk -v2c -c public <target> Sentry3-MIB::systemOutletSeqInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1718.3.1.13.1 snmpget -v2c -c public <target> Sentry3-MIB::systemOutletSeqInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1718.3.1.13.1 i <value>
Start monitoring Server Technology Sentry3 PDUs (RPM, PDU, EM, CDU, Switched -48VDC) (outlet power/environmental sensor status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Sentry3-MIB::systemOutletSeqInterval OID value, configure state conditions and alerts, and monitor any Server Technology Sentry3 PDUs (RPM, PDU, EM, CDU, Switched -48VDC) (outlet power/environmental sensor status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1718 | serverTech | Sentry3-MIB |
| 1.3.6.1.4.1.1718.3 | sentry3 | Sentry3-MIB |
| 1.3.6.1.4.1.1718.3.1 | systemGroup | Sentry3-MIB |
| 1.3.6.1.4.1.1718.3.1.13 | systemOutletSeqInterval | Sentry3-MIB |