Sentry3-MIB :: systemArea

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Sentry3-MIB › systemArea

systemArea

Module: Sentry3-MIB

OID (symbolic): Sentry3-MIB::systemArea

OID (numeric): 1.3.6.1.4.1.1718.3.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The area that the footprint of the system occupies. A non-zero non-negative value indicates the area in tenths of area units as selected by the systemAreaUnit object. A zero or negative value indicates that the area was not available.

What is systemArea?

Records the footprint area the system occupies, in tenths of the unit selected by systemAreaUnit, so that systemWattsPerAreaUnit can be computed; a zero or negative value means no area has been configured.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1718.3.1.7
snmpwalk -v2c -c public <target> Sentry3-MIB::systemArea

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1718.3.1.7.1
snmpget -v2c -c public <target> Sentry3-MIB::systemArea.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1718.3.1.7.1 i <value>

Start monitoring Server Technology Sentry3 PDUs (RPM, PDU, EM, CDU, Switched -48VDC) (outlet power/environmental sensor status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Sentry3-MIB::systemArea OID value, configure state conditions and alerts, and monitor any Server Technology Sentry3 PDUs (RPM, PDU, EM, CDU, Switched -48VDC) (outlet power/environmental sensor status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1718serverTechSentry3-MIB
1.3.6.1.4.1.1718.3sentry3Sentry3-MIB
1.3.6.1.4.1.1718.3.1systemGroupSentry3-MIB
1.3.6.1.4.1.1718.3.1.7systemAreaSentry3-MIB