All MIBs › Sentry3-MIB › infeedVoltage
infeedVoltage
Module: Sentry3-MIB
OID (symbolic): Sentry3-MIB::infeedVoltage
OID (numeric): 1.3.6.1.4.1.1718.3.2.2.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The line-to-line voltage of the input feed. A non-negative value indicates the voltage in tenths of Volts. A negative value indicates that the voltage was not available.
What is infeedVoltage?
Reports the line-to-line voltage measured on this input feed, in tenths of a Volt; a negative value means the voltage could not be measured.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1718.3.2.2.1.11 snmpwalk -v2c -c public <target> Sentry3-MIB::infeedVoltage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1718.3.2.2.1.11.1 snmpget -v2c -c public <target> Sentry3-MIB::infeedVoltage.1
Start monitoring Server Technology Sentry3 PDUs (RPM, PDU, EM, CDU, Switched -48VDC) (outlet power/environmental sensor status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Sentry3-MIB::infeedVoltage OID value, configure state conditions and alerts, and monitor any Server Technology Sentry3 PDUs (RPM, PDU, EM, CDU, Switched -48VDC) (outlet power/environmental sensor status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1718 | serverTech | Sentry3-MIB |
| 1.3.6.1.4.1.1718.3 | sentry3 | Sentry3-MIB |
| 1.3.6.1.4.1.1718.3.2 | systemTables | Sentry3-MIB |
| 1.3.6.1.4.1.1718.3.2.2 | infeedTable | Sentry3-MIB |
| 1.3.6.1.4.1.1718.3.2.2.1 | infeedEntry | Sentry3-MIB |
| 1.3.6.1.4.1.1718.3.2.2.1.11 | infeedVoltage | Sentry3-MIB |