All MIBs › SWITCH-ATM-MIB › atmxPortOperStatus
atmxPortOperStatus
Module: SWITCH-ATM-MIB
OID (symbolic): SWITCH-ATM-MIB::atmxPortOperStatus
OID (numeric): 1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.5
Node type: OBJECT-TYPE
Type: AtmOperStatus
Access: read-only
Description: The operational state (i.e., actual) of this port. The ILMI should not alarm on a physical interface when the value of this object is 'outOfService'. This capability is useful if the equipment is to be disconnected or for troubleshooting purposes. A value of 'loopBack' indicates that loopback is in place.
What is atmxPortOperStatus?
Reports the actual operational state of this ATM port (e.g. in service, out of service, or loopback); ILMI deliberately does not alarm when the port reads outOfService, which is useful when the port is intentionally disconnected or being tested. An admin checks this to confirm whether a port is truly passing traffic, or is in a diagnostic loopback state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.5 snmpwalk -v2c -c public <target> SWITCH-ATM-MIB::atmxPortOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.5.1 snmpget -v2c -c public <target> SWITCH-ATM-MIB::atmxPortOperStatus.1
Start monitoring ATM-capable network switch, legacy ATM transport (interface/virtual-circuit status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-ATM-MIB::atmxPortOperStatus OID value, configure state conditions and alerts, and monitor any ATM-capable network switch, legacy ATM transport (interface/virtual-circuit status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.9 | at8200SwitchMib | TELESYN-ATI-TC |
| 1.3.6.1.4.1.207.8.9.2 | switchMibModules | TELESYN-ATI-TC |
| 1.3.6.1.4.1.207.8.9.2.1 | atmModule | TELESYN-ATI-TC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.9.2.1.1 | switchAtmMib | SWITCH-ATM-MIB |
| 1.3.6.1.4.1.207.8.9.2.1.1.1 | atmxPortGroup | SWITCH-ATM-MIB |
| 1.3.6.1.4.1.207.8.9.2.1.1.1.1 | atmxPortTable | SWITCH-ATM-MIB |
| 1.3.6.1.4.1.207.8.9.2.1.1.1.1.1 | atmxPortEntry | SWITCH-ATM-MIB |
| 1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.5 | atmxPortOperStatus | SWITCH-ATM-MIB |