All MIBs › SW-DES3x50-L2MGMT-MIB › swL2TrafficCtrlBMStromthreshold
swL2TrafficCtrlBMStromthreshold
Module: SW-DES3x50-L2MGMT-MIB
OID (symbolic): SW-DES3x50-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold
OID (numeric): 1.3.6.1.4.1.171.11.2.13.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object to decide how much thousand packets per second broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlDlfStromCtrl objects whether is enabled) will active storm control. Whenever a port reaches its configured amount of packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will start forwarding that type of packet.
What is swL2TrafficCtrlBMStromthreshold?
Sets the storm-control threshold, in thousands of packets per second, above which the switch starts dropping broadcast/multicast/DLF traffic on the affected ports (whichever of swL2TrafficCtrlBcastStromCtrl / McastStromCtrl / DlfStromCtrl are enabled). Once a port exceeds this rate within a one-second window the switch drops that traffic type until the interval expires, then resumes forwarding it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.2.13.1.1.3 snmpwalk -v2c -c public <target> SW-DES3x50-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.2.13.1.1.3.1 snmpget -v2c -c public <target> SW-DES3x50-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.2.13.1.1.3.1 i <value>
Start monitoring D-Link DES-3x50 series managed Ethernet switch (Layer 2 VLAN/STP/MAC-table management root) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SW-DES3x50-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold OID value, configure state conditions and alerts, and monitor any D-Link DES-3x50 series managed Ethernet switch (Layer 2 VLAN/STP/MAC-table management root) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.2 | swL2MgmtMIB | SW-DES3x50-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.2.13 | swL2TrafficMgmt | SW-DES3x50-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.2.13.1 | swL2TrafficCtrlTable | SW-DES3x50-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.2.13.1.1 | swL2TrafficCtrlEntry | SW-DES3x50-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.2.13.1.1.3 | swL2TrafficCtrlBMStromthreshold | SW-DES3x50-L2MGMT-MIB |