All MIBs › SW-DES3x50-L2MGMT-MIB › swL2PortSecurityMode
swL2PortSecurityMode
Module: SW-DES3x50-L2MGMT-MIB
OID (symbolic): SW-DES3x50-L2MGMT-MIB::swL2PortSecurityMode
OID (numeric): 1.3.6.1.4.1.171.11.2.7.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates the mode of locking address. In deleteOnTimeout(2) mode - the locked addresses can be aged out after aging timer expire. In this mode, when the locked address is aged out, the number of address can be learned has to be increased by one. In deleteOnReset(3) mode - never age out the locked addresses unless restart the system to prevent from port movement or intrusion.
What is swL2PortSecurityMode?
Controls how learned (locked) MAC addresses on this secured port are aged out: permanent(2) keeps them until explicitly changed, deleteOnTimeout(3) ages a locked address out once the normal aging timer expires and then allows one more address to be learned, and deleteOnReset(4) keeps locked addresses until the switch restarts, guarding against port movement or intrusion. Note the source DESCRIPTION text mislabels these as deleteOnTimeout(2)/deleteOnReset(3), one number off from the actual SYNTAX values (3)/(4) shown above, apparently left over from before permanent(2) was inserted into the enumeration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.2.7.1.1.3 snmpwalk -v2c -c public <target> SW-DES3x50-L2MGMT-MIB::swL2PortSecurityMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.2.7.1.1.3.1 snmpget -v2c -c public <target> SW-DES3x50-L2MGMT-MIB::swL2PortSecurityMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.2.7.1.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> swL2PortSecurityMode.1
Start monitoring D-Link DES-3x50 series managed Ethernet switch (Layer 2 VLAN/STP/MAC-table management root) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SW-DES3x50-L2MGMT-MIB::swL2PortSecurityMode OID value, configure state conditions and alerts, and monitor any D-Link DES-3x50 series managed Ethernet switch (Layer 2 VLAN/STP/MAC-table management root) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.2 | swL2MgmtMIB | SW-DES3x50-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.2.7 | swL2PortSecurityMgmt | SW-DES3x50-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.2.7.1 | swL2PortSecurityControlTable | SW-DES3x50-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.2.7.1.1 | swL2PortSecurityControlEntry | SW-DES3x50-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.2.7.1.1.3 | swL2PortSecurityMode | SW-DES3x50-L2MGMT-MIB |