SUN-ILOM-CONTROL-MIB :: ilomCtrlNetworkPendingIpDiscovery

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SUN-ILOM-CONTROL-MIB › ilomCtrlNetworkPendingIpDiscovery

ilomCtrlNetworkPendingIpDiscovery

Module: SUN-ILOM-CONTROL-MIB

OID (symbolic): SUN-ILOM-CONTROL-MIB::ilomCtrlNetworkPendingIpDiscovery

OID (numeric): 1.3.6.1.4.1.42.2.175.102.3.1.1.7

Node type: OBJECT-TYPE

Type: ILOMCtrlNetworkIpDiscovery

Access: read-write

Description: This property is used to set the pending value for the mode of IP discovery for the given target. The possible values are static(1) or dynamic(2). Static values can be specified by setting the other pending properties in this table: ilomCtrlNetworkPendingIpAddress, ilomCtrlNetworkPendingIpGateway, and ilomCtrlNetworkPendingIpNetmask. If dynamic is specified, the other pending properties should not be set. This property does not take effect until the ilomCtrlNetworkCommitPending property is set to true for the given row.

What is ilomCtrlNetworkPendingIpDiscovery?

Staged (not-yet-applied) choice of static(1) or dynamic(2) IP discovery for this target; the change only takes effect once ilomCtrlNetworkCommitPending is set true for the same row, letting an admin stage a full static IP/gateway/netmask change atomically.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.42.2.175.102.3.1.1.7
snmpwalk -v2c -c public <target> SUN-ILOM-CONTROL-MIB::ilomCtrlNetworkPendingIpDiscovery

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.42.2.175.102.3.1.1.7.1
snmpget -v2c -c public <target> SUN-ILOM-CONTROL-MIB::ilomCtrlNetworkPendingIpDiscovery.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.42.2.175.102.3.1.1.7.1 s <value>

Start monitoring Sun/Oracle server ILOM service processor (NTP/LDAP/RADIUS remote-access config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUN-ILOM-CONTROL-MIB::ilomCtrlNetworkPendingIpDiscovery OID value, configure state conditions and alerts, and monitor any Sun/Oracle server ILOM service processor (NTP/LDAP/RADIUS remote-access config) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.42sunAGENT-STATS-MIB2
1.3.6.1.4.1.42.2prodAGENT-STATS-MIB2
1.3.6.1.4.1.42.2.175ilomSUN-HW-CTRL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.42.2.175.102ilomCtrlMIBSUN-ILOM-CONTROL-MIB
1.3.6.1.4.1.42.2.175.102.3ilomCtrlNetworkSUN-ILOM-CONTROL-MIB
1.3.6.1.4.1.42.2.175.102.3.1ilomCtrlNetworkTableSUN-ILOM-CONTROL-MIB
1.3.6.1.4.1.42.2.175.102.3.1.1ilomCtrlNetworkEntrySUN-ILOM-CONTROL-MIB
1.3.6.1.4.1.42.2.175.102.3.1.1.7ilomCtrlNetworkPendingIpDiscoverySUN-ILOM-CONTROL-MIB