All MIBs › SUN-ILOM-CONTROL-MIB › ilomCtrlFirmwareMgmtAction
ilomCtrlFirmwareMgmtAction
Module: SUN-ILOM-CONTROL-MIB
OID (symbolic): SUN-ILOM-CONTROL-MIB::ilomCtrlFirmwareMgmtAction
OID (numeric): 1.3.6.1.4.1.42.2.175.102.6.8
Node type: OBJECT-TYPE
Type: ILOMCtrlFirmwareUpdateAction
Access: read-write
Description: This property is used to initiate a firmware update using the values of the other firmware management properties as parameters. It can also clear the values of those parameters. To initiate a firmware update, set the value of this property to initate(2). To clear the values of the writeable firmware management properties, set this propery to clearProperties(1). Before initiating a firmware update, the ilomCtrlFirmwareTFTPServerIP, ilomCtrlFirmwareTFTPFileName, and ilomCtrlFirmwarePreserveConfig properties must be set. After intiating a firmware update, the ilomCtrlFirmwareMgmtStatus property can be used to determine if the operation was successful. This is effectively a write-only property.
What is ilomCtrlFirmwareMgmtAction?
Trigger object that starts a firmware update using the previously set TFTP server, filename, and preserve-config values (initate(2)) or clears those staged values (clearProperties(1)); the update's outcome is then read from ilomCtrlFirmwareMgmtStatus.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.42.2.175.102.6.8 snmpwalk -v2c -c public <target> SUN-ILOM-CONTROL-MIB::ilomCtrlFirmwareMgmtAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.42.2.175.102.6.8.1 snmpget -v2c -c public <target> SUN-ILOM-CONTROL-MIB::ilomCtrlFirmwareMgmtAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.42.2.175.102.6.8.1 s <value>
Start monitoring Sun/Oracle server ILOM service processor (NTP/LDAP/RADIUS remote-access config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUN-ILOM-CONTROL-MIB::ilomCtrlFirmwareMgmtAction OID value, configure state conditions and alerts, and monitor any Sun/Oracle server ILOM service processor (NTP/LDAP/RADIUS remote-access config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.42 | sun | AGENT-STATS-MIB2 |
| 1.3.6.1.4.1.42.2 | prod | AGENT-STATS-MIB2 |
| 1.3.6.1.4.1.42.2.175 | ilom | SUN-HW-CTRL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.42.2.175.102 | ilomCtrlMIB | SUN-ILOM-CONTROL-MIB |
| 1.3.6.1.4.1.42.2.175.102.6 | ilomCtrlFirmwareMgmt | SUN-ILOM-CONTROL-MIB |
| 1.3.6.1.4.1.42.2.175.102.6.8 | ilomCtrlFirmwareMgmtAction | SUN-ILOM-CONTROL-MIB |