SONOMA-MIB :: cdmaReceiverFaultNibble0Status

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SONOMA-MIB › cdmaReceiverFaultNibble0Status

cdmaReceiverFaultNibble0Status

Module: SONOMA-MIB

OID (symbolic): SONOMA-MIB::cdmaReceiverFaultNibble0Status

OID (numeric): 1.3.6.1.4.1.13827.11.2.3

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

Description: This is a bit string contained in one character representing the least significant nibble of the CDMA receiver fault status byte. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the User's Manual for the fault status field returned by the cdmastat command. Each bit indicates a fault when set. Currently defined fault states encoded in this value:

Bit 3: CDMA Receiver Main Oscillator Frequency Control DAC near high or low limit. Bit 2: Time Figure of Merit has been >= TFOM Fault Level for 1 hour. Bit 1: Field Programmable Gate Array (FPGA) Configuration Fault. Bit 0: FLASH Memory Write Fault.

What is cdmaReceiverFaultNibble0Status?

Bit string giving the low nibble of the CDMA receiver's own fault byte, FLASH write fault, FPGA config fault, no-signal timeout, or the receiver's frequency-control DAC nearing its limit, letting an admin pinpoint a receiver-level (not chassis-level) hardware fault.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13827.11.2.3
snmpwalk -v2c -c public <target> SONOMA-MIB::cdmaReceiverFaultNibble0Status

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.13827.11.2.3.1
snmpget -v2c -c public <target> SONOMA-MIB::cdmaReceiverFaultNibble0Status.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cdmaReceiverFaultNibble0Status.1

Start monitoring EndRun Technologies GPS/CDMA network time server appliance (NTP engine/timing-quality status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SONOMA-MIB::cdmaReceiverFaultNibble0Status OID value, configure state conditions and alerts, and monitor any EndRun Technologies GPS/CDMA network time server appliance (NTP engine/timing-quality status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.13827endRunTechnologiesMIBENDRUNTECHNOLOGIES-MIB
Numeric OIDNameModule
1.3.6.1.4.1.13827.11sonomaCDMASONOMA-MIB
1.3.6.1.4.1.13827.11.2cdmaSONOMA-MIB
1.3.6.1.4.1.13827.11.2.3cdmaReceiverFaultNibble0StatusSONOMA-MIB