All MIBs › SNMPv2-USEC-MIB › agentSize

agentSize

OID (symbolic): SNMPv2-USEC-MIB::agentSize

OID (numeric): 1.3.6.1.6.3.6.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The maximum length in octets of an SNMPv2 message which this agent will accept using any transport mapping.

What is agentSize?

This is the largest SNMPv2 message size, in octets, that the agent will accept over any transport mapping. Management software uses this to size outbound SNMP requests so they aren't rejected by the agent as oversized. For example, a value of 1500 means messages larger than 1500 bytes will be refused by this agent.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.6.3.6.1.1.4
snmpwalk -v2c -c public <target> SNMPv2-USEC-MIB::agentSize

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.6.3.6.1.1.4.1
snmpget -v2c -c public <target> SNMPv2-USEC-MIB::agentSize.1

Start monitoring vendor-neutral, standards-based MIB, legacy SNMPv2 agent implementing the User-based Security Model (agent replay-protection/security counters) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMPv2-USEC-MIB::agentSize OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, legacy SNMPv2 agent implementing the User-based Security Model (agent replay-protection/security counters) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.6	snmpV2	DASAN-DHCP-MIB
1.3.6.1.6.3	snmpModules	OSBRiDGE5XLi-MIB

Numeric OID	Name	Module
1.3.6.1.6.3.6	usecMIB	SNMPv2-USEC-MIB
1.3.6.1.6.3.6.1	usecMIBObjects	SNMPv2-USEC-MIB
1.3.6.1.6.3.6.1.1	usecAgent	SNMPv2-USEC-MIB
1.3.6.1.6.3.6.1.1.4	agentSize	SNMPv2-USEC-MIB

SNMPv2-USEC-MIB :: agentSize

agentSize

Module

This MIB depends on