All MIBs › SNMP540-MGMT-MIB › snmp540RlLoopType
snmp540RlLoopType
Module: SNMP540-MGMT-MIB
OID (symbolic): SNMP540-MGMT-MIB::snmp540RlLoopType
OID (numeric): 1.3.6.1.4.1.498.8.4.7.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value Pn127(1), will use a PN127 loopback sequence to initiate a remote loopback test. The value v54(2) will use a V54 loopback sequence to initiate a remote loopback test.
What is snmp540RlLoopType?
Selects which loopback-activation sequence, PN127 or V.54, is used to initiate a remote loopback test. An admin picks the sequence matching what the remote equipment or telco circuit expects.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.4.7.5 snmpwalk -v2c -c public <target> SNMP540-MGMT-MIB::snmp540RlLoopType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.4.7.5.1 snmpget -v2c -c public <target> SNMP540-MGMT-MIB::snmp540RlLoopType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.8.4.7.5.1 i <value>
Start monitoring 540-series data communications/line interface unit (serial port/EIA control-line/alarm-threshold status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMP540-MGMT-MIB::snmp540RlLoopType OID value, configure state conditions and alerts, and monitor any 540-series data communications/line interface unit (serial port/EIA control-line/alarm-threshold status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.8 | dsu | DDS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.8.4 | snmp540 | SNMP540-MGMT-MIB |
| 1.3.6.1.4.1.498.8.4.7 | snmp540DiagTest | SNMP540-MGMT-MIB |
| 1.3.6.1.4.1.498.8.4.7.5 | snmp540RlLoopType | SNMP540-MGMT-MIB |