All MIBs › SNMP540-MGMT-MIB › snmp540LineStatsRxLevel

snmp540LineStatsRxLevel

OID (symbolic): SNMP540-MGMT-MIB::snmp540LineStatsRxLevel

OID (numeric): 1.3.6.1.4.1.498.8.4.6.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object reports the receive level measurement for the selected interval. The range reported is from -50dB to +6dB.

What is snmp540LineStatsRxLevel?

The measured receive signal level on the line, ranging from -50dB to +6dB, for the selected statistics interval. An admin uses this to check whether the incoming signal is within an acceptable range for reliable data transmission.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.4.6.4
snmpwalk -v2c -c public <target> SNMP540-MGMT-MIB::snmp540LineStatsRxLevel

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.4.6.4.1
snmpget -v2c -c public <target> SNMP540-MGMT-MIB::snmp540LineStatsRxLevel.1

Start monitoring 540-series data communications/line interface unit (serial port/EIA control-line/alarm-threshold status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMP540-MGMT-MIB::snmp540LineStatsRxLevel OID value, configure state conditions and alerts, and monitor any 540-series data communications/line interface unit (serial port/EIA control-line/alarm-threshold status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.498	gdc	DMA200-MIB
1.3.6.1.4.1.498.8	dsu	DDS-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.498.8.4	snmp540	SNMP540-MGMT-MIB
1.3.6.1.4.1.498.8.4.6	snmp540LineStats	SNMP540-MGMT-MIB
1.3.6.1.4.1.498.8.4.6.4	snmp540LineStatsRxLevel	SNMP540-MGMT-MIB

SNMP540-MGMT-MIB :: snmp540LineStatsRxLevel

snmp540LineStatsRxLevel

Module

This MIB depends on