All MIBs › SNMP540-MGMT-MIB › snmp540DiagControl
snmp540DiagControl
Module: SNMP540-MGMT-MIB
OID (symbolic): SNMP540-MGMT-MIB::snmp540DiagControl
OID (numeric): 1.3.6.1.4.1.498.8.4.7.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The lineloop(2) selection places the snmp540 into line loopback mode. The noTest(1) and telcoLoop(5) are READ ONLY values. NoTest(1) indicates that no diagnostic test is in progress. The value telcoLoop(5) will be reported when a DSU/CSU test is initiated by Telco. The value remoteLoop(3) is used initiate a remote loopback test. The value resetTestToNorm(4) will halt the execution of diagnostic test that may be running.
What is snmp540DiagControl?
Controls and reports the unit's diagnostic test mode: noTest and telcoLoop are read-only status values, while an admin writes lineloop to enter local loopback, remoteLoop to initiate a remote loopback test, or resetTestToNorm to halt whatever diagnostic test is currently running.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.4.7.7 snmpwalk -v2c -c public <target> SNMP540-MGMT-MIB::snmp540DiagControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.4.7.7.1 snmpget -v2c -c public <target> SNMP540-MGMT-MIB::snmp540DiagControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.8.4.7.7.1 i <value>
Start monitoring 540-series data communications/line interface unit (serial port/EIA control-line/alarm-threshold status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMP540-MGMT-MIB::snmp540DiagControl OID value, configure state conditions and alerts, and monitor any 540-series data communications/line interface unit (serial port/EIA control-line/alarm-threshold status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.8 | dsu | DDS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.8.4 | snmp540 | SNMP540-MGMT-MIB |
| 1.3.6.1.4.1.498.8.4.7 | snmp540DiagTest | SNMP540-MGMT-MIB |
| 1.3.6.1.4.1.498.8.4.7.7 | snmp540DiagControl | SNMP540-MGMT-MIB |