All MIBs › SNA-LLC-MIB › llcSapAdminMaxIPDUOctetsSend
llcSapAdminMaxIPDUOctetsSend
Module: SNA-LLC-MIB
OID (symbolic): SNA-LLC-MIB::llcSapAdminMaxIPDUOctetsSend
OID (numeric): 1.3.6.1.3.51.1.2.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object denotes the default maximum I PDU size, in octets, that LLCs on this SAP may send to their remote connection component partners. This count is referred to as 'N1' in the IEEE 802.2 specification [??].
A zero value for this object indicates that the port default, llcPortAdminMaxIPDUOctetsSend, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminMaxIPDUOctetsSend object.
At connection setup, the remote LLC may send, using an XID frame, the maximum I PDU size which it is prepared to receive. If so, an implementation may choose to override the administered maximum PDU size with the dynamically learned value and should reflect this in the llcCcOperMaxIPDUOctetsSend object for the connection component.
The I PDU size includes all octets in a frame, excluding framing characters, the MAC header and link link header.
What is llcSapAdminMaxIPDUOctetsSend?
Sets the default maximum I-frame PDU size (octets, IEEE 802.2's "N1") that connections on this SAP may send; a value of zero means fall back to the port-wide llcPortAdminMaxIPDUOctetsSend, and this SAP value can itself be overridden per-connection - giving an admin a mid-level tuning point between port-wide and per-connection frame-size limits.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.51.1.2.1.1.3 snmpwalk -v2c -c public <target> SNA-LLC-MIB::llcSapAdminMaxIPDUOctetsSend
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.51.1.2.1.1.3.1 snmpget -v2c -c public <target> SNA-LLC-MIB::llcSapAdminMaxIPDUOctetsSend.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.51.1.2.1.1.3.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, SNA gateway or front-end processor supporting LLC over LAN (802.2 LLC port status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNA-LLC-MIB::llcSapAdminMaxIPDUOctetsSend OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, SNA gateway or front-end processor supporting LLC over LAN (802.2 LLC port status) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.51 | snaDLCexp | SNA-LLC-MIB |
| 1.3.6.1.3.51.1 | llc | SNA-LLC-MIB |
| 1.3.6.1.3.51.1.2 | llcSapGroup | SNA-LLC-MIB |
| 1.3.6.1.3.51.1.2.1 | llcSapAdminTable | SNA-LLC-MIB |
| 1.3.6.1.3.51.1.2.1.1 | llcSapAdminEntry | SNA-LLC-MIB |
| 1.3.6.1.3.51.1.2.1.1.3 | llcSapAdminMaxIPDUOctetsSend | SNA-LLC-MIB |