All MIBs › SLAC-OPT-MIB › cdx6500slacsQLLCState
cdx6500slacsQLLCState
Module: SLAC-OPT-MIB
OID (symbolic): SLAC-OPT-MIB::cdx6500slacsQLLCState
OID (numeric): 1.3.6.1.4.1.449.2.1.3.1.7.1.1.55
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: Indicates the status of the QLLC layer: INOPERATIVE : No connection exists with the station. LINK-CLOSED : X.25 call is connected, but there has been no successful QXID exchange and data cannot pass. LINK-OPENING: The X.25 call is connected and there has been a successful QXID exchange. However, there has been no QUA or QDM response to a QSM command. LINK-OPENED : X.25 call is connected and data is passing. LINK-CLOSING: Disconnect in process. Station may come back up after an SVC clear or PVC reset. If it does not, boot the station to clear it. LINK-RECOVERY: X.25 call is connected and the station has sent a QFRMR packet over the link. Station may come back up after SVC clear or PVC reset. If it does not recover, boot the station to clear it. NOTE: This value is not supported by the 6500.
What is cdx6500slacsQLLCState?
Reports the QLLC (X.25-based SNA transport) layer's current state for this station, such as INOPERATIVE, LINK-CLOSED, LINK-OPENING, LINK-OPENED, LINK-CLOSING, or LINK-RECOVERY; per the MIB this value is not supported on the 6500 platform.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.7.1.1.55 snmpwalk -v2c -c public <target> SLAC-OPT-MIB::cdx6500slacsQLLCState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.7.1.1.55.1 snmpget -v2c -c public <target> SLAC-OPT-MIB::cdx6500slacsQLLCState.1
Start monitoring Motorola/Codex cdx6500 WAN network access concentrator (SLAC line/port configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SLAC-OPT-MIB::cdx6500slacsQLLCState OID value, configure state conditions and alerts, and monitor any Motorola/Codex cdx6500 WAN network access concentrator (SLAC line/port configuration) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3 | cdx6500Statistics | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1 | cdx6500StatProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.3.1.7 | cdx6500PSTSLACStationGroup | SLAC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.7.1 | cdx6500PSTSLACStationTable | SLAC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1 | cdx6500PSTSLACStationEntry | SLAC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.55 | cdx6500slacsQLLCState | SLAC-OPT-MIB |