All MIBs › SL-ENTITY-MIB › slEntPhysicalAdminStatus
slEntPhysicalAdminStatus
Module: SL-ENTITY-MIB
OID (symbolic): SL-ENTITY-MIB::slEntPhysicalAdminStatus
OID (numeric): 1.3.6.1.4.1.4515.1.3.6.1.1.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state). State warmBoot(4) cause the card a Warm Start. The state coldBoot(5)has two meanings. If the card is present it means to reinitialize it with the factory defaults. This is equivalent to Cold Start. Setting the object to the value hotBoot(7) cause the card to reboot in a non service affecting manner. If the card is not present it means that the former configuration of this slot is not longer kept in the system. In this case the slot is ready for insertion of a new card of any type.
What is slEntPhysicalAdminStatus?
This read-write value is the administratively desired state of this card: up, down, testing, or one of three reboot modes (warm, cold, or hot boot). An admin writes coldBoot(5) to reinitialize a present card back to factory defaults, or hotBoot(7) to reboot it without affecting service. For example, setting this to warmBoot(4) on a hung line card triggers a warm restart of just that card without a factory reset.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4515.1.3.6.1.1.1.17 snmpwalk -v2c -c public <target> SL-ENTITY-MIB::slEntPhysicalAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4515.1.3.6.1.1.1.17.1 snmpget -v2c -c public <target> SL-ENTITY-MIB::slEntPhysicalAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4515.1.3.6.1.1.1.17.1 i <value>
Start monitoring Smartoptics SiteLight optical network elements (physical entity/firmware/protection-state inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL-ENTITY-MIB::slEntPhysicalAdminStatus OID value, configure state conditions and alerts, and monitor any Smartoptics SiteLight optical network elements (physical entity/firmware/protection-state inventory) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4515 | smartoptics | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1 | sitelight | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1.3 | slMain | SL-MAIN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4515.1.3.6 | slmEntity | SL-ENTITY-MIB |
| 1.3.6.1.4.1.4515.1.3.6.1 | slEntityPhysical | SL-ENTITY-MIB |
| 1.3.6.1.4.1.4515.1.3.6.1.1 | slEntPhysicalTable | SL-ENTITY-MIB |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1 | slEntPhysicalEntry | SL-ENTITY-MIB |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.17 | slEntPhysicalAdminStatus | SL-ENTITY-MIB |