All MIBs › SITEBOSS-220-STD-MIB › espcTempIndexES
espcTempIndexES
Module: SITEBOSS-220-STD-MIB
OID (symbolic): SITEBOSS-220-STD-MIB::espcTempIndexES
OID (numeric): 1.3.6.1.4.1.3052.43.2.2.1.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The part of the point index that refers to an EventSensor.
The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config temperature table; namely, which EventSensor, and which sensor (a.k.a. point).
This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu.
For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor.
What is espcTempIndexES?
The EventSensor-number part of the 2-part point-config index used in the temperature configuration table; like esIndexES, values 1-16 are additional EventSensors and 200 is the unit's built-in one.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.43.2.2.1.1.1 snmpwalk -v2c -c public <target> SITEBOSS-220-STD-MIB::espcTempIndexES
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.43.2.2.1.1.1.1 snmpget -v2c -c public <target> SITEBOSS-220-STD-MIB::espcTempIndexES.1
Start monitoring Asentria SiteBoss 220 remote site monitor (analog/digital sensor point/alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SITEBOSS-220-STD-MIB::espcTempIndexES OID value, configure state conditions and alerts, and monitor any Asentria SiteBoss 220 remote site monitor (analog/digital sensor point/alarm status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.43 | s220 | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.2 | config | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.2.2 | eventSensorPointConfig | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.2.2.1 | esPointConfigTempTable | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.2.2.1.1 | esPointConfigTempEntry | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.2.2.1.1.1 | espcTempIndexES | SITEBOSS-220-STD-MIB |