All MIBs › SITEBOSS-220-STD-MIB › esPointValueInt
esPointValueInt
Module: SITEBOSS-220-STD-MIB
OID (symbolic): SITEBOSS-220-STD-MIB::esPointValueInt
OID (numeric): 1.3.6.1.4.1.3052.43.1.1.1.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: A read-only number referring to the value of a point on an EventSensor.
If the point class is temperature, then this object is the temperature in its configured scale (default is Fahrenheit).
If the point class is contact closure or relay, then this object is either 0 (open) or 1 (closed).
If the point class is humidity, then this object is the percent relative humidity.
If the point class is analog input, then this object is the signed input value in tenths of the configured units.
If the point class is relay, then this object is either 1 (active a.k.a. energized) or 0 (inactive a.k.a. de-energized). This object cannot be used to control the relay (use esPointInEventState for that).
What is esPointValueInt?
The point's current value as a number: degrees in the configured scale for temperature, percent relative humidity for humidity, 0/1 for open/closed on contact closures, tenths of a configured unit for analog inputs, or 1/0 for a relay's active/inactive state (note: use esPointInEventState, not this object, to actually control a relay).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.43.1.1.1.1.6 snmpwalk -v2c -c public <target> SITEBOSS-220-STD-MIB::esPointValueInt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.43.1.1.1.1.6.1 snmpget -v2c -c public <target> SITEBOSS-220-STD-MIB::esPointValueInt.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.43.1.1.1.1.6.1 i <value>
Start monitoring Asentria SiteBoss 220 remote site monitor (analog/digital sensor point/alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SITEBOSS-220-STD-MIB::esPointValueInt OID value, configure state conditions and alerts, and monitor any Asentria SiteBoss 220 remote site monitor (analog/digital sensor point/alarm status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.43 | s220 | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.1 | status | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.1.1 | eventSensorStatus | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.1.1.1 | esPointTable | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.1.1.1.1 | esPointEntry | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.1.1.1.1.6 | esPointValueInt | SITEBOSS-220-STD-MIB |