All MIBs › SITEBOSS-220-STD-MIB › actionRTNAlertsEnable
actionRTNAlertsEnable
Module: SITEBOSS-220-STD-MIB
OID (symbolic): SITEBOSS-220-STD-MIB::actionRTNAlertsEnable
OID (numeric): 1.3.6.1.4.1.3052.43.2.14.3
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Return to Normal Alerts Enabled
What is actionRTNAlertsEnable?
An ON/OFF string that enables or disables sending a return-to-normal alert when a previously alarmed point clears back to its normal state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.43.2.14.3 snmpwalk -v2c -c public <target> SITEBOSS-220-STD-MIB::actionRTNAlertsEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.43.2.14.3.1 snmpget -v2c -c public <target> SITEBOSS-220-STD-MIB::actionRTNAlertsEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.43.2.14.3.1 s <value>
Start monitoring Asentria SiteBoss 220 remote site monitor (analog/digital sensor point/alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SITEBOSS-220-STD-MIB::actionRTNAlertsEnable OID value, configure state conditions and alerts, and monitor any Asentria SiteBoss 220 remote site monitor (analog/digital sensor point/alarm status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.43 | s220 | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.2 | config | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.2.14 | action | SITEBOSS-220-STD-MIB |
| 1.3.6.1.4.1.3052.43.2.14.3 | actionRTNAlertsEnable | SITEBOSS-220-STD-MIB |