All MIBs › SHELF-MIB › adrFailHoldOffTime
adrFailHoldOffTime
Module: SHELF-MIB
OID (symbolic): SHELF-MIB::adrFailHoldOffTime
OID (numeric): 1.3.6.1.4.1.1038.150.3.1
Node type: OBJECT-TYPE
Type: HoldTime
Access: read-write
Description: Failure hold off time : the time interval during which the defect is present and the failure is not raised
What is adrFailHoldOffTime?
The failure hold-off time - how long a defect must persist (1, 3, 10, or 30 seconds) before it is escalated into a reported failure - an admin tunes this to filter out transient blips from generating alarms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.150.3.1 snmpwalk -v2c -c public <target> SHELF-MIB::adrFailHoldOffTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.150.3.1.1 snmpget -v2c -c public <target> SHELF-MIB::adrFailHoldOffTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.150.3.1.1 s <value>
Start monitoring SAGEM ADR access/transmission shelf equipment (slot/card inventory and power-feed status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SHELF-MIB::adrFailHoldOffTime OID value, configure state conditions and alerts, and monitor any SAGEM ADR access/transmission shelf equipment (slot/card inventory and power-feed status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1038 | sagemDr | SAGEM-DR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1038.150 | shelf | SHELF-MIB |
| 1.3.6.1.4.1.1038.150.3 | holdTime | SHELF-MIB |
| 1.3.6.1.4.1.1038.150.3.1 | adrFailHoldOffTime | SHELF-MIB |