All MIBs › SENAO-ENTERPRISE-INDOOR-AP-CB-MIB › entRouterEnable
entRouterEnable
Module: SENAO-ENTERPRISE-INDOOR-AP-CB-MIB
OID (symbolic): SENAO-ENTERPRISE-INDOOR-AP-CB-MIB::entRouterEnable
OID (numeric): 1.3.6.1.4.1.14125.100.3.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Only When op mode is 0(AP) or (Client bridge), can set this attribute. Set TRUE will enable the router.
What is entRouterEnable?
Setting this TRUE turns on NAT/routing behavior on the device, available only when the unit is operating as an AP or client bridge. An admin enables this when the device needs to route traffic between its WAN and LAN sides rather than simply bridging.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14125.100.3.1 snmpwalk -v2c -c public <target> SENAO-ENTERPRISE-INDOOR-AP-CB-MIB::entRouterEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14125.100.3.1.1 snmpget -v2c -c public <target> SENAO-ENTERPRISE-INDOOR-AP-CB-MIB::entRouterEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.14125.100.3.1.1 s <value>
Start monitoring Senao enterprise indoor access point, Senao client bridge (802.11 radio/client-association status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SENAO-ENTERPRISE-INDOOR-AP-CB-MIB::entRouterEnable OID value, configure state conditions and alerts, and monitor any Senao enterprise indoor access point, Senao client bridge (802.11 radio/client-association status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.14125 | senao | SENAO-ENTERPRISE-INDOOR-AP-CB-MIB |
| 1.3.6.1.4.1.14125.100 | indoorWirelessDevice | SENAO-ENTERPRISE-INDOOR-AP-CB-MIB |
| 1.3.6.1.4.1.14125.100.3 | entWAN | SENAO-ENTERPRISE-INDOOR-AP-CB-MIB |
| 1.3.6.1.4.1.14125.100.3.1 | entRouterEnable | SENAO-ENTERPRISE-INDOOR-AP-CB-MIB |