All MIBs › SEI-SMI › juiceBoxPortDetectionSetting
juiceBoxPortDetectionSetting
Module: SEI-SMI
OID (symbolic): SEI-SMI::juiceBoxPortDetectionSetting
OID (numeric): 1.3.6.1.4.1.20364.1.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Describes the type of PD detection performed by the port. A value of disabled(1) means that no PD detection is performed. If a port currently delivering power is set to disabled(1), power will be removed from the port. A value of ieee802.3afonly(2) means only PDs with valid signatures as defined by ieee 802.3af will be detected and powered. A value of ieee8023afandlegacy(3) means that PDs with 802.3af and legacy signatures will be detected and powered. A value of forcedon(4) means the port is powered without regard to detection status. A setting of forcedon(4) is not persistent and must be re-asserted after restart/reboot
What is juiceBoxPortDetectionSetting?
This read-write enumerated object controls what kind of powered-device (PD) detection a JuiceBox PoE port performs: disabled(1) (no detection, and power is removed if currently on), ieee8023afonly(2), ieee8023afandlegacy(3), or forcedon(4) (power regardless of detection, non-persistent across reboot). An admin changes this to control how strictly the port validates a connected device before energizing it, or to force power to a device with a non-standard or unrecognized signature. For example, an admin sets a port to forcedon(4) to power a legacy device that doesn't present a valid 802.3af signature, knowing that setting won't survive a reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.20364.1.1.1.1.2 snmpwalk -v2c -c public <target> SEI-SMI::juiceBoxPortDetectionSetting
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.20364.1.1.1.1.2.1 snmpget -v2c -c public <target> SEI-SMI::juiceBoxPortDetectionSetting.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.20364.1.1.1.1.2.1 i <value>
Start monitoring System Engineering International JuiceBox product line device (base enterprise OID registration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SEI-SMI::juiceBoxPortDetectionSetting OID value, configure state conditions and alerts, and monitor any System Engineering International JuiceBox product line device (base enterprise OID registration) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.20364 | sei | SEI-SMI |
| 1.3.6.1.4.1.20364.1 | juiceBoxPse | SEI-SMI |
| 1.3.6.1.4.1.20364.1.1 | juiceBoxObjects | SEI-SMI |
| 1.3.6.1.4.1.20364.1.1.1 | juiceBoxPortTable | SEI-SMI |
| 1.3.6.1.4.1.20364.1.1.1.1 | juiceBoxPortEntry | SEI-SMI |
| 1.3.6.1.4.1.20364.1.1.1.1.2 | juiceBoxPortDetectionSetting | SEI-SMI |